SATO MB410i, MB400i manual Normal operation mode, Power saving mode

Page 58

Normal operation mode

The LED display for the normal operation mode is as follows.

Operation status	STATUS (LED)


Starting normal printing mode	ON (orange)

Online	ON (green)

Offline	OFF

When the buzzer sound mode is enabled, the buzzer sounds upon startup.

The battery life indicator remains on even when the printer is OFFLINE.

Power saving mode

1. Sleep mode:

With the printer is online, the STATUS (LED) blinks (green) every two sec- onds. When offline, the STATUS (LED) is off. The battery life indicator (LED) remains on even when the printer is OFFLINE.

The printer enters sleep mode (standby status) when it has not been oper- ated for five seconds.

Normal status is resumed by pressing the PRINT button or the FEED but- ton, by receiving data, or by opening and closing the main cover.

54

Image 58

Contents Quick Guide Page Table of Contents Operation with Bluetooth or Wireless LAN For the Bluetooth or wireless LAN options PrefacePage Markings and Symbols Safety PrecautionsSymbol examples Liquid Specific WarningsForeign Matter Dropping and Damage DisassemblyAbnormal Conditions AC Adaptor / Battery Charger Option Battery PackSpecific Cautions LocationPower Thermal Head and Stepping MotorReplacing the Battery Pack Tear-off BarLeaving the printer unused for a long time Precautions in UseMaintenance and Cleaning Do not place the printer in a hot or cold placeConnect the correct cables to the external input terminals Use the recommended accessoriesDo not disassemble or modify the printer Use the correct mediaUnpacking Names of Parts Label guide stopper Label width scale Names and Functions of Operating Parts Battery life indicator LED Power buttonBattery cover Label guideCharging the Battery Pack Preparing for First-time OperationCharging time Charging time Installing and Removing the Battery Pack Using the AC Adapter AC adapter DC input terminal DC output terminal Continuous Printing Mode Loading LabelsLabel guide stopper Page Dispense mode printing Label guide stopper Page Page Page Power on Turning the Power OnPower OFF Test Printing Operation with an RS-232C Cable Operation with a USB Cable USB cover USB cable Operation via Infrared Communica- tion Page Operation with Bluetooth or Wire- less LAN Removing printed labels When the next label is not printed Troubleshooting Status LED/buzzer Mode Content Cause Clearing Method When printing fails automatic printing DIP Switch section of , Refer Daily Care Caring for the thermal headCaring for the platen/dispenser roller/paper sensor Options ReferenceIncluded Items User optionsBattery charger single AC adapter for printerCase with rain-resistant cover Fastening method Waist case Does not fit over rubber boot RS-232C cable USB cableOperation Modes Prints the printer statusNormal operation mode Power saving modeTest printing mode Feed button + Power on Dispense mode printing Dispense mode printing setting Changing the dispense mode printing settingHead check setting mode DIP switch settingsOnline command setting mode Online command setting details Change online command settingBuzzer sound mode setting Change buzzer sound settingStandard/non-standard specifications Standard/non-standard code setting modeChange standard/non-standard code setting DIP Switch Setting DIP switchDIP Swith setting items DIP Switch Cover Key Startup ModeBasic Specifications of MB400i/MB410i Head check/battery check/paper end/cover open/test USB MB400i MB410i Barcode Sato Contacts Sato Group of Companies