TRENDnet TEW-603PI manual Checking for Available Access Points

Page 16

Checking for Available Access Points

To scan for access points using the TEW-603PI, refer to the following.

1. Open the Wireless Client Utility and click SiteSurvey.

2.Available wireless networks are listed. Click Refresh anytime to update the list.

3.Select the network you want and click Connect. Or click Add To Profile if you want to con- nect later.

For details about any of the listed access points, select it from the list and click Detailed Info to see the following screen. (You can also double-click an access point to view the Detailed Info screen.

16

Image 16

Contents Page Federal Communication Commission Interference Statement CE Mark Warning Table of Contents Getting Started with the TEW-603PI About Your Wireless Mimo PCI Adapter Package ContentSystem Requirement LED DefinitionProduct Outline Overview of the Wireless Client Utility Working with Profiles Click ProfilePage Click Next. The Wlan Security Configuration screen appears Page Modifying Profiles Page WPA/WPA2 Checking for Available Access Points Disabling the Wireless Client Utility Page Exploring the Wireless Client Utility Screens Network ScreenSecurity Shows the current network IP address Profile Screen SiteSurvey Screen Assigned to a wireless Wi-Fi network Options Screen Version Screen Configuring Wireless Security Configuring SecurityProperties window, click Wlan Security Select the encryption to match your access point Configuring WPA & WPA2 Configuring WPA-PSK & WPA2-PSK Type in a unique User ID and Password under User Information Check this box if your network requires user certification Configuring 802.1X EAP-TLS Glossary Ssid Maintenance AppendixClick Next in the Choose Destination Location screen Troubleshooting Problem Corrective ActionProblems Communicating With Other Computers Page Limited Warranty