TRENDnet TEW-603PI manual

Page 41

Infrastructure Make sure that the AP and the associated computers are turned on and working properly.

Make sure the TEW-603PI computer and the associated AP use the same SSID.

Change the AP and the associated wireless clients to use another radio channel if interference is high.

Make sure that the computer and the AP share the same security option and key. Verify the settings in the Profile Security Settings screen.

Ad-Hoc (IBSS) Verify that the peer computer(s) is turned on.

Make sure the TEW-603PI computer and the peer computer(s) are using the same SSID and channel.

Make sure that the computer and the peer computer(s) share the same security option and key.

Change the wireless clients to use another radio channel if interference is high.

48

Image 41

Contents Page Federal Communication Commission Interference Statement CE Mark Warning Table of Contents Getting Started with the TEW-603PI Package Content About Your Wireless Mimo PCI AdapterSystem Requirement LED DefinitionProduct Outline Overview of the Wireless Client Utility Click Profile Working with ProfilesPage Click Next. The Wlan Security Configuration screen appears Page Modifying Profiles Page WPA/WPA2 Checking for Available Access Points Disabling the Wireless Client Utility Page Network Screen Exploring the Wireless Client Utility ScreensSecurity Shows the current network IP address Profile Screen SiteSurvey Screen Assigned to a wireless Wi-Fi network Options Screen Version Screen Configuring Security Configuring Wireless SecurityProperties window, click Wlan Security Select the encryption to match your access point Configuring WPA & WPA2 Configuring WPA-PSK & WPA2-PSK Type in a unique User ID and Password under User Information Check this box if your network requires user certification Configuring 802.1X EAP-TLS Glossary Ssid Appendix MaintenanceClick Next in the Choose Destination Location screen Problem Corrective Action TroubleshootingProblems Communicating With Other Computers Page Limited Warranty