TRENDnet TEW-603PI manual Type in a unique User ID and Password under User Information

Page 32

CONFIGURING 802.1X

You need to know if your access point supports 802.1X and then apply the configuration here.

1.Choose the EAP method under Authentication protocol.

2.Options for User Information depend on the EAP method chosen.

CONFIGURING 802.1X – PEAP

Refer to the following to configure PEAP.

1.At WPA security mode, click Configure button next to Authentication Protocol.

2.Select Inner PEAP protocol.

3.Click Save to finish and return to the previous screen.

4.Type in a unique User ID and Password under User Information.

5.If your network uses a user server certificate click Configure Certificate (see Note below). The following window appears:

32

Image 32

Contents Page Federal Communication Commission Interference Statement CE Mark Warning Table of Contents Getting Started with the TEW-603PI About Your Wireless Mimo PCI Adapter Package ContentSystem Requirement LED DefinitionProduct Outline Overview of the Wireless Client Utility Working with Profiles Click ProfilePage Click Next. The Wlan Security Configuration screen appears Page Modifying Profiles Page WPA/WPA2 Checking for Available Access Points Disabling the Wireless Client Utility Page Exploring the Wireless Client Utility Screens Network ScreenSecurity Shows the current network IP address Profile Screen SiteSurvey Screen Assigned to a wireless Wi-Fi network Options Screen Version Screen Configuring Wireless Security Configuring SecurityProperties window, click Wlan Security Select the encryption to match your access point Configuring WPA & WPA2 Configuring WPA-PSK & WPA2-PSK Type in a unique User ID and Password under User Information Check this box if your network requires user certification Configuring 802.1X EAP-TLS Glossary Ssid Maintenance AppendixClick Next in the Choose Destination Location screen Troubleshooting Problem Corrective ActionProblems Communicating With Other Computers Page Limited Warranty