TRENDnet TEW-603PI manual Configuring WPA-PSK & WPA2-PSK

Page 31

CONFIGURING WPA-PSK & WPA2-PSK

Refer to the following to configure WPA-PSK / WPA2-PSK

1.Click the drop-down arrow at Security Mode and choose WPA-PSK /WPA2-PSK.

2.Click the drop-down arrow at Encryption Method and choose TKIP or AES. (Most access points use TKIP for WPA-PSK.)

3.At PSK Passphrase enter the same pass phrase used to configure the WPA-PSK on your access point.

31

Image 31

Contents Page Federal Communication Commission Interference Statement CE Mark Warning Table of Contents Getting Started with the TEW-603PI LED Definition About Your Wireless Mimo PCI AdapterPackage Content System RequirementProduct Outline Overview of the Wireless Client Utility Click Profile Working with ProfilesPage Click Next. The Wlan Security Configuration screen appears Page Modifying Profiles Page WPA/WPA2 Checking for Available Access Points Disabling the Wireless Client Utility Page Network Screen Exploring the Wireless Client Utility ScreensSecurity Shows the current network IP address Profile Screen SiteSurvey Screen Assigned to a wireless Wi-Fi network Options Screen Version Screen Configuring Security Configuring Wireless SecurityProperties window, click Wlan Security Select the encryption to match your access point Configuring WPA & WPA2 Configuring WPA-PSK & WPA2-PSK Type in a unique User ID and Password under User Information Check this box if your network requires user certification Configuring 802.1X EAP-TLS Glossary Ssid Appendix MaintenanceClick Next in the Choose Destination Location screen Problem Corrective Action TroubleshootingProblems Communicating With Other Computers Page Limited Warranty