F. Press Save. Wait 30 seconds for the device to reboot and then try the application again. It may be necessary to restart your application or your computer for the application to recognize the change.
Can not access the Internet
For Cable Modem users, find the workstation’s “Computer” name and then input this name in the device’s “Device/Computer Name” field.
1.On the Workstation (95, 98, and 98Me), go to Start ?Control Panel ? Network, and select Identification tab. Copy the Computer name as shown in the left figure below. For Win2000, right click on “my computer”, select “properties”, click on “network identifications”, click on “properties”, and then copy the computer name.
2.Run the GUI setup program, select the device, and click on “Configure” to go to the Management tab.
3.Paste the name on to the field “Device/Computer Name” as shown in the right figure below.
Figure 31
For DSL PPPoE users, make sure you have entered the username along with your ISP domain name. For example, username@earthlink.net, which is composed by username
(provided by your ISP) followed by your ISP’s domain.
- 38 -