TRENDnet TEG-S4000 manual Device Description, Features and Capabilities

Page 5

Device Description, Features and Capabilities

4-Slot Modular Switch Front and Rear Panels

This section describes the features on the front and rear panels of the 4-Slot Modular Switch unit.

Figure 1-2. Front Panel

Figure 1-3. Rear Panel

All LED status indicators are located on the FRONT panel of the switches. They provide a real-time indication of system and operational status. The ports for connections to other devices and networks are also on the front panels, along with the crossover switches. The following sections provide descriptions of the LED indicators and ports.

	LED	Explanation
	Indicators	Explanation
	Indicators
		The red power indicator is illuminated
	Power	when power is provided to the switch and
		the switch is turned in the ON position.
		Green Link/Activity indicators are
		illuminated when the switch detects a
		connection to that port. The indicator
	Link/Activity	blinks when data is transmitted over the
		network connected to that port.
		When a port is not connected, the
		indicator is off.

Image 5

Contents TEG-S4000 Copyright Statement Introduction Package ContentsFour Rubber feet Slot Modular Switch Front and Rear Panels Device Description, Features and CapabilitiesPorts 10/100Base-TX Module Ports 10/100Base-TX Module FeaturesPage Port 100Base-FX Module Front View Ports 100Base-FX Fiber ModulePort 100Base-FX Front View Ports 100Base-FX Fiber Module FeaturesPorts 100Base-FX Fiber Module Feature Location and setting duplex mode1000Base-T Module Features 1000Base-SX/LX Fiber Module Features1000Base-SX/LX Fiber Module 1000Base-T ModulePage 10Base-T Ethernet Network Guidelines Planning your Network100Base-TX Fast Ethernet Network Guidelines 100Base-FX Fast Ethernet Network GuidelinesExpanded Networks 1000BASE-SX /LX / TX Network GuidelineNetwork Planning 100Base-TX Networks 10Base-T NetworksExpanding your 100Base-TX network Class Collapsed Backbone LinkFileserver Link 100Base SolutionMulti-port Bridge with High-Bandwidth Backbone 1000Base SolutionUsed as a Multiport Bridge Choosing a Location InstallationRack Installation Supplying PowerConnecting the Switch Handling the Modules Module Setup and InstallationInstalling 10/100Base-TX Modules Installing the ModulesInstalling 100Base-FX Modules Installing 1000Base-SX/LX ModulesInstalling 1000Base-T Modules Appendix A. Technical SpecificationsPower Input VoltageFrequency Removing the ModulesPhysical Characteristics 1000Mbps indicator for 1000T module Power on/off indicator Pin Pin Station Ports 1 ~ Cascade Ports Appendix B. Pin AssignmentsTechnical Support Switch Adapter Hub