TRENDnet TEG-S4000I manual LED Indicators, Lk/Act

The 3-pronged power plug and On/off switched are located at the Rear Panel of the Modular Switch displayed in Figure 2-2. The Switch will work with AC in the range 100-240VAC, 50-60Hz.

Figure 2-2.

Rear Pane

LED Indicators

All LED status indicators are located on the FRONT panel of the switch. They provide a real-time indication of system and operational status. The ports for connections to other devices and networks are also on the front panels.

LED	Status	Meaning
Power	Green	Power on
Diag	Red	Alert and problem notice
LK/ACT	Green	Device has been connected to the port
	Blinks	The data is transmitting on the port
	Off	No device attached
FD/COL	Yellow	Port in full duplex mode
	Blinks	A collision occurs on the port
	Off	No device attached or in half duplex mode

100	Green	The Port is in 100Mbps mode
( Only for 8
port 10/100M	Off	Not connected or in 10 Mbps mode
Switch Module )

Table 2-1. The above table provides descriptions of the LED status and their meaning.

10