Afterwards, you click to select Port 4 and Port 5 for the purpose of overlapping. Remember to click “ Apply “ button after you finish your setting.
Now you have create two VLAN Groups ( Group1 VID=1 and Group2 VID=2 ) with overlapping ports ( Port 4 & Port 5 ).
Tagging ( Mac Address based ) VLAN
This method of tagging is defined in the IEEE 802.1Q standard, to configure switch port by the tagging function that allows the port to transmit tagging frame. VLAN Tagging can only be used if the devices at both ends of a link support IEEE 802.1Q.
The following example show you how to create 3 VLAN Groups with one common tagged port.
MaxSwitch II M
| Group 1 VID= 1 |
|
Group 2 VID= 2 | Group 3 VID= 3 | Group 1VID= 1 |
Connect to Port |
| |
| 1 | Connect to Port |
| 802.1Q |
|
| VLAN Tag=1 |
|
67