TRENDnet TEG-S4000I manual Ports

Page 36

Ports

Inside Ports page, you can enable/disable each port, configure Speed/Duplex for each port, and assign VLAN ID.

The Port Management table shows the port status of all ports. You can also change some properties of all ports in this table.

Figure 5-4 The Ports Page

Module and Port number

Enabled: if this option is disabled, all packets are not received or transmitted from that port

Link: indicates whether a node links to that port or not

Speed: current receive or transmit speed of 10/100/1000 Mbps

Duplex: full or half duplex

Tagged: whether a packet transmitted with VLAN tagged or not

Default VLAN ID: if a packet is received without VLAN tagged, then the Default VLAN ID is used to classify this packet to that

VLAN

Note: memorial note for this port, max length is 16 characters

Note: if you want to set multiple VLANs, we suggest that you set Default VLAN ID for each port first then set VLAN in the VLAN

36

Image 36
Contents TEG-S4000i Ethernet / Fast Ethernet / Gigabit EthernetSlot modular switch manual Release NoteInternet Explorer Setting Vlan SettingIntroduction Key Features Intelligent Module Features Management MethodsConsole and Telnet Management Web-based Management Snmp Network ManagementPackage Contents Physical Description Front & Rear PanelLED Indicators LK/ACTSoftware Concepts RS-232 ConsoleStatic Address Spanning TreeVirtual LANs VLANs Port TrunkingPort Mirror Port SecurityPriority Broadcast Storm FilterCollapsed Backbone Application Departmental Bridge Collapsed Backbone ApplicationDepartmental Bridge Application Ieee 802.1Q Vlan Application Port-based Vlan WorkgroupShared Server Connecting to the Network Pre-Installation RequirementsMounting the Switch Desktop InstallationRack Mounting 4. Attach mounting brackets with screwsPower On Connecting the Switch Diagnostic TestSetting of communication parameters Device Settings Assigning IP AddressPort Setting Page Address table Igmp Vlan Mode 2 modes Vlan For Cpu2 VLANs Secure IP for Telnet and Http System Login About Web-based ManagementSystem Configuration Home Modules ModulesPorts PortsStatistics 1 The Statistics2 The Statistics Vlan Virtual LAN Trunk VlanSTP Spanning Tree Protocol Trunk1 The STP upper Page 1 The STP lower Type the number in the Max Allowed MAC Address Count Programmable Mapping of 802.1p to Internal Priority Priority 11. Port Priority Type of Service Igmp IP MulticastStatic Address 13 The Static Address 15 The Port Mirror IP Config 16 The IP Config Save and Reboot SaveUpgrade RebootSnmp Management Snmp Management Operation DescriptionProduct Specifications Compliance EMI Appendix a Internet Explorer Setting Click sites Level Page MaxSwitch II M Port-Based VlanPage MaxSwitch II M Tagging Mac Address based VlanPage Page Problem Report Hardware Repair ServiceRegistration Technical Support

TEG-S4000I specifications

The TRENDnet TEG-S4000I is a robust and efficient gigabit switch designed for high-performance networking solutions. This switch is particularly well-suited for small to medium-sized businesses that require a reliable infrastructure to support data-intensive applications. With a total of 48 gigabit Ethernet ports, the TEG-S4000I ensures high-speed connectivity for a variety of devices, enhancing productivity and collaboration within an organization.

One of the standout features of the TEG-S4000I is its Layer 2 switching capabilities, which provide advanced traffic management and control over data flow. The switch supports a variety of VLAN configurations, allowing network administrators to segment the network effectively and control broadcast domains. This feature is particularly beneficial for improving security and optimizing network performance.

The TEG-S4000I is also equipped with advanced Quality of Service (QoS) functionalities. With QoS, network traffic can be prioritized to ensure that critical applications receive the necessary bandwidth for optimal performance. This is important for businesses that rely on real-time applications such as VoIP or video conferencing, as it helps to minimize latency and improve overall user experience.

In terms of connectivity, the TEG-S4000I supports both standard and high-density environments. It offers 48 RJ-45 ports, along with 4 SFP slots for fiber optic connections, providing versatility and flexibility in terms of network design. This makes it easy to expand the network as the organization grows, without incurring significant additional costs.

The TEG-S4000I features a fanless design, ensuring quiet operation, which is ideal for office environments. The switch is also designed for energy efficiency, complying with IEEE 802.3az Energy Efficient Ethernet standards, which help reduce power consumption during periods of low network traffic.

Moreover, the switch comes with a durable and compact metal chassis, ensuring longevity and reliability in various deployment scenarios. The intuitive interface of the TEG-S4000I makes installation and configuration straightforward, enabling IT professionals to set up the network quickly and efficiently.

In summary, the TRENDnet TEG-S4000I is an efficient, versatile solution for network connectivity, featuring extensive port capacity, VLAN support, QoS capabilities, and energy-saving technologies. Its design caters to the needs of modern businesses, ensuring that they can scale their operations while maintaining high levels of performance and reliability.