TRENDnet TEG-S4000I manual Home

Page 34

Home

The Home page displays the configuration of the Modular Switch.

System Name : An administratively-assigned name of the managed unit, can be modified in SNMP page.

System Location : The physical location of this managed unit ( e.g., laboratory, 3rd floor ), can be modified in SNMP page.

System Contact : The contact person for this managed unit, can be modified in SNMP page.

System Up Time : The time last since the managed unit was re- initialized, read only.

IP Address : The IP address of the managed unit, can be modified in IP Config page.

Subnet Mask : The subnet mask of the managed unit, can be modified in IP Config page.

Default Gateway : The default gateway of the managed unit, can be modified in IP Config page.

MAC Address : The MAC address of the managed unit, read only.

Firmware Version : The firmware version of the management unit, read only. You can on-line upgrade the new firmware if the new version is released.

Note: By default, IE4.0 does not allow Java Applets to open sockets. The user has to explicitly modify the browser setting to enable Java Applets to use network ports. ( See Appendix A: for the means to modify the setting ).

34

Image 34

Contents TEG-S4000i Ethernet / Fast Ethernet / Gigabit EthernetSlot modular switch manual Release NoteInternet Explorer Setting Vlan SettingIntroduction Key Features Management Methods Intelligent Module FeaturesConsole and Telnet Management Web-based Management Snmp Network ManagementPackage Contents Physical Description Front & Rear PanelLED Indicators LK/ACTStatic Address Software ConceptsRS-232 Console Spanning TreeVirtual LANs VLANs Port TrunkingPriority Port MirrorPort Security Broadcast Storm FilterCollapsed Backbone Application Departmental Bridge Collapsed Backbone ApplicationDepartmental Bridge Application Ieee 802.1Q Vlan Application Port-based Vlan WorkgroupShared Server Connecting to the Network Pre-Installation RequirementsMounting the Switch Desktop InstallationRack Mounting 4. Attach mounting brackets with screwsPower On Connecting the Switch Diagnostic TestSetting of communication parameters Device Settings Assigning IP AddressPort Setting Page Address table Igmp Vlan Mode 2 modes Vlan For Cpu2 VLANs Secure IP for Telnet and Http System Login About Web-based ManagementSystem Configuration Home Modules ModulesPorts PortsStatistics 1 The Statistics2 The Statistics Vlan Virtual LAN Trunk VlanSTP Spanning Tree Protocol Trunk1 The STP upper Page 1 The STP lower Type the number in the Max Allowed MAC Address Count Programmable Mapping of 802.1p to Internal Priority Priority 11. Port Priority Type of Service Igmp IP MulticastStatic Address 13 The Static Address 15 The Port Mirror IP Config 16 The IP Config Save and Reboot SaveUpgrade RebootSnmp Management Snmp Management Operation DescriptionProduct Specifications Compliance EMI Appendix a Internet Explorer Setting Click sites Level Page MaxSwitch II M Port-Based VlanPage MaxSwitch II M Tagging Mac Address based VlanPage Page Hardware Repair Service Problem ReportRegistration Technical Support