PCMCIA 10/100 Mbps Ethernet PC Card User’s Manual
Driver installation
The following sections cover installation of the client driver for Windows NT 3.51, Windows for Workgroups 3.11, Netware 3X/4X, Microsoft LAN Manager, and Artisoft LANtastic Version 6.0.
Microsoft Windows NT 3.51
Follow these instructions to install the Microsoft Windows NT
3.51client for your Ethernet Card:
1.Insert the Ethernet Card into an available PCMCIA slot.
2.Boot the computer.
3.Click Control Panel in the main window and click the Network icon.
4.Click Add Adapter. Pull down the adapter’s list and se- lect <other> Requires disk from manufacturer, then click Continue.
5.Type “A:\winnt351” (where “A” is your floppy drive) and click OK.
6.Set the proper IRQ, I/O port, memory address settings, and connection type for this card.
7.Reboot the computer to complete the installation.
24!