TRENDnet PF-16 PCMCIA user manual Installing the driver for Linux

•• ! • • • • • • • —Installation for Linux

Installing the driver for Linux

Follow these instructions to install the driver for the Linux op- erating system:

1.Log on as the “root”.

2.Copy the driver code from the Installation disk using the following syntax:

mount /dev/fd0 /mnt

cp /mnt/linux/en0100a.tar /tmp cd /tmp

tar xvf en0100a.tar

3. Generate the driver using the following syntax:

cd /tmp/en0100a make all

If the path of your PCMCIA source is not “/usr/src/linux/pcmcia-3.0.9”, you need to modify the “PCMCIASRC” variable of the “Makefile” file. Consult your Linux documentation for details.

If the path of your loadable module is not “/lib/modules/2.0.35”, you need to modify the “DEST1” & “DEST2” variables of the “Makefile” file. Consult your Linux documentation for details.

4. Install the driver using the following syntax:

make install

5.Configure the PCMCIA 10/100 Ethernet card using the following syntax:

cd /etc/pcmcia

Add the following text to the “config” file. The config file must be in “write” mode.

￿￿! ￿￿￿￿￿￿￿29