TRENDnet PF-16 PCMCIA user manual Appendix B, Enabler program error messages

Appendix B

Enabler program error messages

CARDGO.EXE

Here is the list of error messages the CARDGO.EXE may display.

Error	Message	Solution
[Error 1]	“The PCMCIA controller is	There is no PCMCIA con-
	not present or recognized”	troller on your computer.
		Install a PCMCIA controller
		from another computer.
[Error 2]	“There is no card in the	Ensure that the PC card is
	PCMCIA slot. Insert the	correctly inserted into the
	card.”	PCMCIA slot.
[Error 3]	“The card in PCMCIA slot is	Ensure that the PC Card in
	not PCMCIA 10/100 Mbps	the notebook’s PCMCIA
	Ethernet Card. Insert it”	slot is the Ethernet Card
		and that it is correctly in-
		serted.
[Error 4]	“The I/O ports do not re-	Change to another I/O port
	spond. Change to another	using /IO=xxx. Refer to
	one”	“Manual Installation” in
		Chapter 4.
[Error 5]	“The I/O ports specified are	Valid I/O addresses are
	invalid. Change to another	240, 280, 300, 320, 340,
	one”	and 360.
[Error 6]	“The IRQ specified is invalid.	Valid IRQ values are 3, 4,
	Change to another one”	5, 9, 10, and 11.

33