Star Micronics TSP100 manual Non-recoverable errors

2) Non-recoverable errors

Error Description	POWER Lamp	ERROR Lamp	Recovery Conditions
Head thermistor error	Flashes at 0.5-	Flashes at 0.5-	Non-recoverable
	second intervals	second intervals
Board thermistor error	Flashes at 2-	Flashes at 2-	Non-recoverable
	second intervals	second intervals
VM voltage error	Off	Flashes at 1-	Non-recoverable
		second intervals
VCC voltage error	Flashes at 1-	Flashes at 1-	Non-recoverable
	second intervals	second intervals
EEPROM error	Flashes at 0.25-	Flashes at 0.25-	Non-recoverable
	second intervals	second intervals
USB error	Flashes at 5-	Flashes at 5-	Non-recoverable
	second intervals	second intervals
CPU error	Off	Off	Non-recoverable
RAM error	Off	On	Non-recoverable

Note:

1)If a non-recoverable error occurs, turn the power OFF immediately.

2)If a non-recoverable error occurs, please consult the dealer for repairs.

3)Paper cut error

Error Description	POWER Lamp	ERROR Lamp	Recovery Conditions
Paper cut error	Off	Flashes at 0.125-	Recovered by turning the power
		second intervals	OFF, eliminating the cause of
			the error such as jammed paper,
			returning the cutter to its home
			position, and turning the power
			ON (see 7-3).

Note:

If the cutter does not return to its home position or does not perform the initial movement, it will result in a non-recoverable error.

4) Paper detection error

Error Description	POWER Lamp	ERROR Lamp	Recovery Conditions
Paper out error	On	Flashes at 0.5-	Automatically recovered by
		second intervals	loading a new paper roll, then
			closing the printer cover.

– 18 –