Star Micronics TSP400 Series user manual Setting UP, Loading the Paper Roll

ENGLISH

1.SETTING UP

■First, remove the blue semi-transparent tape from all parts.

■Before loading the first paper roll, be sure to remove the cardboard and the protective paper (under the tear bar)

that were inserted to protect the print head during shipping.

Fig. 1-1

1-1. Loading the Paper Roll

Your printer accepts thermal roll paper 60mm ~ 82mm wide.

The procedure for loading a paper roll is as follows. The illustrations show the TSP412 printer, however, the loading procedure for the TSP442 is the same.

Printer cover

1 Switch off the printer’s power.

2 Open the printer cover.

Fig. 1-2
Paper roll	3 Cut the top edge of the paper straight
	across. If the paper end is secured to
	the roll by a label or by tape, unroll
	the paper one turn and cut away all
Paper-roll shaft	traces of adhesive. (Adhesive can
	stick to the internal paper roller and
	interfere with paper feeding.)
	4 Insert the paper-roll shaft into the
Fig. 1-3	paper roll.

– 1 –