Star Micronics TSP400 Series user manual Adjusting the Head Position

ENGLISH

9 Return the print head unit to its original position and be sure that it locks into place. (The printer cover will not close unless the print head unit is locked.)

0 Move the paper roll onto the print- er’s paper-roll holder.

A Hold the roll down and pull on the leading edge of the paper to re- move any slack.

Fig. 1-7

B Close the printer cover.

1-2. Adjusting the Head Position

Thick paper 0.6mm

Thin paper

1You can set the print head position to accommodate thick or thin paper. Change the position by moving the left-side and right-side levers for-

ward or back.

2Be sure to unlock the print head before moving the levers.

Fig. 1-8

– 3 –