Star Micronics TSP400 Series Paper Specifications, Nippon Paper Industries TF50KS-E TF62KS-E

Paper Specifications

Recommended paper-roll types:

NIPPON PAPER INDUSTRIES TF50KS-E

TF62KS-E

NEW OJI PAPER Co.,Ltd. KF-730

Many paper types are available. Please use paper that meets the following criteria.

1.	Paper type	General high-sensitivity thermal paper
		General high-sensitivity label paper
		∙ If you use medium or low sensitivity paper,
		run a test print to check operation. If the
		printer is unable to print at 50mm/sec, set the
		0
		print speed to 25mm/sec.
2.	Paper width	60mm ~ 82-1mm
		∙ When using narrow paper, be sure that the
		paper is at least wide enough to keep the platen
		and head from touching. Never use paper that
		allows the head to touch the platen.
		∙ If the paper width is 70mm or less, do not run
		the platen in reverse.
3.	Paper thickness	General thermal paper:	60 ~ 150μm
		Label paper:	Max. 160μm
4.	Paper rolls	Internal diameter:	25.4mm (1 inch)
		Outer diameter:	115mm

Rolls must have the thermal side facing in- wards. Never use tape or other adhesive to fasten the trailing end of the paper to the roller.

APPENDIX

– 50 –