6.While holding the printer cassette at an angle, insert the two round tabs on either side of the ribbon cassette into the two slots inside the printer. Then, press the lower half of the cassette inward to a vertical position until it snaps securely into place.
Knob
7.Rotate the knob on the cassette counterclockwise so that the ribbon slides under the head.
8.Set the adjustment lever to position 1. Position 1 is for thin paper. You may need to set the adjustment lever to another position, if you are using a thick paper.
9.Close the printer cover.
Important!
Printing that is poor quality or too light is almost always due to a ribbon that is simply worn out or “used up.” If you experience problems with print quality, check the condition of the ribbon. If the black part looks gray and
– 9 –