Control panel functions in off-line mode
Line feed
Press the LINE FEED button once to feed the paper one line. Holding down the LINE FEED button continually feeds the paper, 1/6” (default) at a time, until you release the button.
The line feed is executed using the current line feed value. In Self Test mode, this button is ignored. While this button is held down, line feed is executed up to 13 times. If the button is held down after 13 times of line feed, the paper is continuously fed to the top of the next page. If the ON LINE button is pressed while this button is held down, form feed is executed.
Set/Park/Eject
Press the SET/PARK/EJECT button to set, eject, or park the paper.
If the paper is not loaded (paper end condition), paper loading is executed. After the paper is loaded completely, the printer switches on- line mode. If the paper is loaded (not paper end condition), the paper is parked when using fanfold paper or ejected when using
| Paper Condition | |
|
|
|
| Paper End | Not Paper End |
|
|
|
When using fanfold paper | Paper load (Paper set) | Paper park |
|
|
|
When using | Paper load (Paper set) | Paper eject |
|
|
|
Form feed
While holding down the LINE FEED button, press the ON LINE button to feed the paper to the top of the next page. If
– 27 –