TRENDnet TEW-611BRP manual Static WAN Mode, Dhcp WAN Mode, PPPoE, Pptp

Page 14

Static WAN Mode

Used when your ISP provides you a set IP address that does not change. The IP information is manually entered in your IP configuration settings. You must enter the IP address, Subnet Mask, Gateway, Primary DNS Server, and Secondary DNS Server. Your ISP provides you with all of this information.

DHCP WAN Mode

A method of connection where the ISP assigns your IP address when your router requests one from the ISP's server. Some ISP's require you to make some settings on your side before your router can connect to the Internet.

Host Name: Some ISP's may check your computer's Host Name. The Host Name identifies your system to the ISP's server. This way they know your computer is eligible to receive an IP address. In other words, they know that you are paying for their service.

Enable BigPond: Check this option to connect to the internet through Telstra BigPond Cable Broadband in Australia. Telstra BigPond provides the values for BigPond Server, BigPond User Id, and BigPond Password.

PPPoE

Select this option if your ISP requires you to use a PPPoE (Point to Point Protocol over Ethernet) connection. DSL providers typically use this option. This method of connection requires you to enter a Username and Password (provided by your Internet Service Provider) to gain access to the Internet.

Service Name: Some ISP's may require that you enter a Service Name. Only enter a Service Name if your ISP requires one.

Reconnect Mode: Typically PPPoE connections are not always on. The Wireless router allows you to set the reconnection mode. The settings are:

Always on: A connection to the Internet is always maintained.

On demand: A connection to the Internet is made as needed.

Manual: You have to open up the Web-based management interface and click the Connect button manually any time that you wish to connect to the Internet.

Maximum Idle Time: Time interval the machine can be idle before the PPPoE connection is disconnected. The Maximum Idle Time value is only used for the "On demand" connection mode.

PPTP

PPTP (Point to Point Tunneling Protocol) uses a virtual private network to connect to your ISP. This method of connection is primarily used in Europe. This method of connection requires you to enter a Username and Password (provided by your Internet Service Provider) to gain access to the Internet. The ISP provides the values for PPTP IP Address, PPTP Subnet Mask , PPTP Gateway IP Address, and PPTP Server IP Address (may be the same as the gateway).

Reconnect Mode: Typically PPTP connections are not always on. The Wireless router allows you to set the reconnection mode. The settings are:

14

Image 14
Contents Page Federal Communication Commission Interference Statement Table of Contents Getting Started with the TEW-611BRP Package Contents Wireless LAN Networking Introduction Hardware Overview LEDs Getting Started Using the Configuration Menu ¾ Click LoginInternet Connection Setup Wizard BasicWizardWireless Security Setup Wizard BasicWANPPPoE Static WAN ModeDhcp WAN Mode PptpL2TP AdvancedPage BasicLAN Enable Dhcp Server BasicDHCPDhcp Lease Time Dhcp IP Address RangeExample Always BroadcastAdd/Edit Static Dhcp Client Static Dhcp Client ListBasicWireless Enable Wireless RadioVisibility Status Wireless Network NameSuper G Mode Auto Channel SelectWPA-Personal WEPWPA-Personal and WPA-Enterprise Advanced Optional Backup Radius Server Advanced AdvancedVirtual ServerName EnableAdd/Edit Virtual Server IP AddressAdvancedSpecial Applications Virtual Servers ListSIP RtspFTP AOL MMSAdvancedGaming Special Applications Rules ListGame Rules List Edit/Add Game RuleTCP Ports To Open / UDP Ports To Open AdvancedTraffic Shaping Dynamic Fragmentation Traffic Shaping Setup Enable Traffic ShapingAutomatic Classification Automatic Uplink SpeedSource IP Range Add/Edit Traffic Shaping RulePriority Source Port RangeRoutes List AdvancedRoutingAdd/Edit Route AdvancedAccess Control Policy Name Add/Edit Access Control RuleLog Internet Access Address TypeAdd/Edit Web Site Access Control Rules ListAdvancedWEB Filter Web SiteDoubleclick.net Save Enable MAC Address FilterAdvancedMAC Address Filter Allowed Web Site ListFilter Wired Clients Filter Settings ModeFilter Wireless Clients Add/Edit MAC AddressAdvancedFirewall Enable SPIEnable DMZ DMZ IP AddressAction AdvancedInbound FilterAdd/Edit Inbound Filter Rule Allow All AdvancedAdvanced WirelessInbound Filter Rules List Deny AllWDS Enable 802.11d EnableTransmit Power Fragmentation ThresholdDays AdvancedSchedulesAdd/Edit Schedule Rule All Day 24 hrsEnd Time Schedule Rules ListToolsAdmin ToolsEnable Remote Management Admin PasswordUser Password Remote Admin PortToolsTime Automatic Time Configuration Enable NTP Server Time Configuration Time ZoneDaylight Saving Enable Daylight Saving OffsetSyslog Server IP Address Enable Logging to Syslog ServerToolsSyslog ToolsEmail Enable Enable Email NotificationEmail Settings From Email Address To Email AddressVerify Password Enable AuthenticationPassword Email Log When Full or on Schedule On Log FullToolsSystem Reboot the DeviceRestore all Settings to the Factory Defaults ToolsFirmwareUpload Firmware UpgradeFirmware Information Server Address Enable Dynamic DNSToolsDynamic DNS Host NameTimeout Password or KeyVerify Password or Key Status StatusDevice infoPPPoE, PPTP, L2TP Connection StatusWirelessDhcp Connection BigPond ConnectionSignal StatusRoutingView Levels StatusLogsWhat to View StatusStatistics StatusActive Sessions NAT Adsl AsciiBootp CAT Dhcp DMZEAP DNSDSL GUI Icmp HttpHttps IeeeIPX ISPLPR/LPD LANLED MDIMppe MdixMIB MTUOfdm NICNTP OSIRIP PPPRadius Snmp RSASmtp SohoTCP/IP SsidTCP TftpUTP URLUSB VlanWlan WDSWisp WPALimited Warranty
Related manuals
Manual 16 pages 50.98 Kb

TEW-611BRP specifications

The TRENDnet TEW-611BRP is a reliable wireless router designed for small to medium-sized networks, offering robust performance and a range of features ideal for both home and office use. This versatile router supports the 802.11g wireless standard, enabling data transfer rates of up to 54 Mbps, making it a suitable choice for everyday internet tasks such as browsing, streaming, and online gaming.

One of the standout features of the TEW-611BRP is its secure wireless connectivity. The device supports WEP, WPA, and WPA2 encryption protocols, ensuring that users can create a secure network environment. Its built-in firewall also provides added security against potential intrusions, making it easier for users to protect sensitive data while navigating the online landscape.

Another important aspect of the TEW-611BRP is its ease of setup and management. The router comes with a user-friendly web interface that allows users to quickly configure their settings without requiring extensive technical knowledge. Additionally, the TEW-611BRP supports Virtual Server function, enabling users to host applications such as web servers or game servers easily.

The TEW-611BRP features a built-in DHCP server, which simplifies the process of assigning IP addresses to devices on the network, ensuring smooth communication between devices. The router also offers versatile connectivity options with four Ethernet ports, allowing wired connections for devices that require a stable connection, such as gaming consoles and desktop computers.

In terms of range, the TEW-611BRP is equipped with high-gain antennas that extend coverage throughout a typical home or small office, reducing dead zones and allowing users to enjoy a stable connection even when moving between rooms. Compatibility with a range of operating systems, such as Windows, macOS, and Linux, further enhances its versatility.

Ultimately, the TRENDnet TEW-611BRP stands out as a dependable and feature-rich wireless router. Its combination of security, ease of use, and decent performance makes it an excellent option for anyone looking to establish a solid wireless network for various applications and devices. Overall, it provides a balance of cost-effectiveness and reliability that makes it a great choice for users seeking an efficient networking solution.