TRENDnet TEW-611BRP manual Nat

Page 64

Protocol

The communications protocol used for the conversation.

External

The IP address and port number of the WAN-side application.

NAT

The port number of the LAN-side application as viewed by the WAN-side application.

Priority

The preference given to outbound packets of this conversation by the Traffic Shaping logic. Smaller numbers represent higher priority.

State

When SPI (Stateful Packet Inspection) is enabled, this is the state for sessions that use the TCP protocol.

Dir

The direction of initiation of the conversation:

Egress

Initiated from LAN to WAN.

Ingress

Initiated from WAN to LAN.

Time Out

The number of seconds of idle time until the router considers the session terminated.

64

Image 64
Contents Page Federal Communication Commission Interference Statement Table of Contents Getting Started with the TEW-611BRP Package Contents Wireless LAN Networking Introduction Hardware Overview LEDs Getting Started Using the Configuration Menu ¾ Click LoginInternet Connection Setup Wizard BasicWizardWireless Security Setup Wizard BasicWANStatic WAN Mode Dhcp WAN ModePPPoE PptpL2TP AdvancedPage BasicLAN Enable Dhcp Server BasicDHCPDhcp IP Address Range ExampleDhcp Lease Time Always BroadcastAdd/Edit Static Dhcp Client Static Dhcp Client ListBasicWireless Enable Wireless RadioWireless Network Name Super G ModeVisibility Status Auto Channel SelectWPA-Personal and WPA-Enterprise WEPWPA-Personal Advanced Optional Backup Radius Server Advanced AdvancedVirtual ServerEnable Add/Edit Virtual ServerName IP AddressAdvancedSpecial Applications Virtual Servers ListFTP RtspSIP AOL MMSAdvancedGaming Special Applications Rules ListTCP Ports To Open / UDP Ports To Open Edit/Add Game RuleGame Rules List AdvancedTraffic Shaping Traffic Shaping Setup Enable Traffic Shaping Automatic ClassificationDynamic Fragmentation Automatic Uplink SpeedAdd/Edit Traffic Shaping Rule PrioritySource IP Range Source Port RangeAdd/Edit Route AdvancedRoutingRoutes List AdvancedAccess Control Add/Edit Access Control Rule Log Internet AccessPolicy Name Address TypeAccess Control Rules List AdvancedWEB FilterAdd/Edit Web Site Web SiteEnable MAC Address Filter AdvancedMAC Address FilterDoubleclick.net Save Allowed Web Site ListFilter Settings Mode Filter Wireless ClientsFilter Wired Clients Add/Edit MAC AddressEnable SPI Enable DMZAdvancedFirewall DMZ IP AddressAdd/Edit Inbound Filter Rule AdvancedInbound FilterAction AdvancedAdvanced Wireless Inbound Filter Rules ListAllow All Deny All802.11d Enable Transmit PowerWDS Enable Fragmentation ThresholdAdvancedSchedules Add/Edit Schedule RuleDays All Day 24 hrsEnd Time Schedule Rules ListToolsAdmin ToolsAdmin Password User PasswordEnable Remote Management Remote Admin PortToolsTime Time Configuration Time Zone Daylight Saving EnableAutomatic Time Configuration Enable NTP Server Daylight Saving OffsetToolsSyslog Enable Logging to Syslog ServerSyslog Server IP Address Enable Enable Email Notification Email Settings From Email AddressToolsEmail To Email AddressEnable Authentication PasswordVerify Password Email Log When Full or on Schedule On Log FullReboot the Device Restore all Settings to the Factory DefaultsToolsSystem ToolsFirmwareFirmware Information Firmware UpgradeUpload Enable Dynamic DNS ToolsDynamic DNSServer Address Host NameVerify Password or Key Password or KeyTimeout Status StatusDevice infoStatusWireless Dhcp ConnectionPPPoE, PPTP, L2TP Connection BigPond ConnectionSignal StatusRouting What to View StatusLogs View Levels StatusStatistics StatusActive Sessions NAT Adsl AsciiBootp CAT Dhcp DMZDSL DNSEAP GUI Http HttpsIcmp IeeeIPX ISPLAN LEDLPR/LPD MDIMdix MIBMppe MTUNIC NTPOfdm OSIRadius PPPRIP RSA SmtpSnmp SohoSsid TCPTCP/IP TftpURL USBUTP VlanWDS WispWlan WPALimited Warranty
Related manuals
Manual 16 pages 50.98 Kb