TRENDnet TEW-611BRP Add/Edit Virtual Server, Enable, Name, IP Address, Protocol, Private Port

Page 26

5.Select the Protocol - TCP

6.Ensure the schedule is set to Always

7. Click

Save

to add the settings to the Virtual Servers List

8.Repeat these steps for each Virtual Server Rule you wish to add. After the list is complete, click Save Settings at the top of the page.

With this Virtual Server entry, all Internet traffic on Port 8888 will be redirected to your internal web server on port 80 at IP Address 192.168.0.50.

Add/Edit Virtual Server

In this section you can add an entry to the Vertual Servers List below or edit an existing entry.

Enable

Entries in the list can be either active (enabled) or inactive (disabled).

Name

Assign a meaningful name to the virtual server, for example Web Server. Several well-known types of virtual server are available from the "Select Virtual Server" list. Selecting one of these entries fills some of the remaining parameters with standard values for that type of server.

IP Address

The IP address of the system on your internal network that will provide the virtual service, for example 192.168.0.50.

Protocol

Select the protocol used by the service.

Private Port

The port that will be used on your internal network.

Public Port

The port that will be accessed from the Internet.

Inbound Filter

Select a filter that controls access as needed for this virtual server. If you do not see the filter you need in the list of filters, go to the Advanced -> Inbound Filter screen and create a new filter.

Schedule

Select a schedule for when the service will be enabled. If you do not see the schedule you need in the list of schedules, go to the Tools -> Schedules screen and create a new schedule.

Save

Saves the new or edited virtual server entry in the following list. When finished updating the

26

Image 26
Contents Page Federal Communication Commission Interference Statement Table of Contents Getting Started with the TEW-611BRP Package Contents Wireless LAN Networking Introduction Hardware Overview LEDs Getting Started Using the Configuration Menu ¾ Click LoginInternet Connection Setup Wizard BasicWizardWireless Security Setup Wizard BasicWANPPPoE Static WAN ModeDhcp WAN Mode PptpL2TP AdvancedPage BasicLAN Enable Dhcp Server BasicDHCPDhcp Lease Time Dhcp IP Address RangeExample Always BroadcastAdd/Edit Static Dhcp Client Static Dhcp Client ListBasicWireless Enable Wireless RadioVisibility Status Wireless Network NameSuper G Mode Auto Channel SelectWPA-Personal WEPWPA-Personal and WPA-Enterprise Advanced Optional Backup Radius Server Advanced AdvancedVirtual ServerName EnableAdd/Edit Virtual Server IP AddressAdvancedSpecial Applications Virtual Servers ListSIP RtspFTP AOL MMSAdvancedGaming Special Applications Rules ListGame Rules List Edit/Add Game RuleTCP Ports To Open / UDP Ports To Open AdvancedTraffic Shaping Dynamic Fragmentation Traffic Shaping Setup Enable Traffic ShapingAutomatic Classification Automatic Uplink SpeedSource IP Range Add/Edit Traffic Shaping RulePriority Source Port RangeRoutes List AdvancedRoutingAdd/Edit Route AdvancedAccess Control Policy Name Add/Edit Access Control RuleLog Internet Access Address TypeAdd/Edit Web Site Access Control Rules ListAdvancedWEB Filter Web SiteDoubleclick.net Save Enable MAC Address FilterAdvancedMAC Address Filter Allowed Web Site ListFilter Wired Clients Filter Settings ModeFilter Wireless Clients Add/Edit MAC AddressAdvancedFirewall Enable SPIEnable DMZ DMZ IP AddressAction AdvancedInbound FilterAdd/Edit Inbound Filter Rule Allow All AdvancedAdvanced WirelessInbound Filter Rules List Deny AllWDS Enable 802.11d EnableTransmit Power Fragmentation ThresholdDays AdvancedSchedulesAdd/Edit Schedule Rule All Day 24 hrsEnd Time Schedule Rules ListToolsAdmin ToolsEnable Remote Management Admin PasswordUser Password Remote Admin PortToolsTime Automatic Time Configuration Enable NTP Server Time Configuration Time ZoneDaylight Saving Enable Daylight Saving OffsetSyslog Server IP Address Enable Logging to Syslog ServerToolsSyslog ToolsEmail Enable Enable Email NotificationEmail Settings From Email Address To Email AddressVerify Password Enable AuthenticationPassword Email Log When Full or on Schedule On Log FullToolsSystem Reboot the DeviceRestore all Settings to the Factory Defaults ToolsFirmwareUpload Firmware UpgradeFirmware Information Server Address Enable Dynamic DNSToolsDynamic DNS Host NameTimeout Password or KeyVerify Password or Key Status StatusDevice infoPPPoE, PPTP, L2TP Connection StatusWirelessDhcp Connection BigPond ConnectionSignal StatusRoutingView Levels StatusLogsWhat to View StatusStatistics StatusActive Sessions NAT Adsl AsciiBootp CAT Dhcp DMZEAP DNSDSL GUI Icmp HttpHttps IeeeIPX ISPLPR/LPD LANLED MDIMppe MdixMIB MTUOfdm NICNTP OSIRIP PPPRadius Snmp RSASmtp SohoTCP/IP SsidTCP TftpUTP URLUSB VlanWlan WDSWisp WPALimited Warranty
Related manuals
Manual 16 pages 50.98 Kb

TEW-611BRP specifications

The TRENDnet TEW-611BRP is a reliable wireless router designed for small to medium-sized networks, offering robust performance and a range of features ideal for both home and office use. This versatile router supports the 802.11g wireless standard, enabling data transfer rates of up to 54 Mbps, making it a suitable choice for everyday internet tasks such as browsing, streaming, and online gaming.

One of the standout features of the TEW-611BRP is its secure wireless connectivity. The device supports WEP, WPA, and WPA2 encryption protocols, ensuring that users can create a secure network environment. Its built-in firewall also provides added security against potential intrusions, making it easier for users to protect sensitive data while navigating the online landscape.

Another important aspect of the TEW-611BRP is its ease of setup and management. The router comes with a user-friendly web interface that allows users to quickly configure their settings without requiring extensive technical knowledge. Additionally, the TEW-611BRP supports Virtual Server function, enabling users to host applications such as web servers or game servers easily.

The TEW-611BRP features a built-in DHCP server, which simplifies the process of assigning IP addresses to devices on the network, ensuring smooth communication between devices. The router also offers versatile connectivity options with four Ethernet ports, allowing wired connections for devices that require a stable connection, such as gaming consoles and desktop computers.

In terms of range, the TEW-611BRP is equipped with high-gain antennas that extend coverage throughout a typical home or small office, reducing dead zones and allowing users to enjoy a stable connection even when moving between rooms. Compatibility with a range of operating systems, such as Windows, macOS, and Linux, further enhances its versatility.

Ultimately, the TRENDnet TEW-611BRP stands out as a dependable and feature-rich wireless router. Its combination of security, ease of use, and decent performance makes it an excellent option for anyone looking to establish a solid wireless network for various applications and devices. Overall, it provides a balance of cost-effectiveness and reliability that makes it a great choice for users seeking an efficient networking solution.