TRENDnet TEW-611BRP manual StatusRouting, Signal

Page 60

Signal

This is a relative measure of signal quality. The value is expressed as a percentage of theoretical best quality. Signal quality can be reduced by distance, by interference from other radio-frequency sources (such as cordless telephones or neighboring wireless networks), and by obstacles between the router and the wireless device.

Status_Routing

The routing section displays all of the routing details configured for your router.

A value of 0.0.0.0 for gateway means there is no next hop, and the IP address is directly connected to the router on the interface specified: LAN or WAN. A value of 0.0.0.0 in both the destination IP and net mask means that this is the default route.

60

Image 60

Contents Page Federal Communication Commission Interference Statement Table of Contents Getting Started with the TEW-611BRP Package Contents Wireless LAN Networking Introduction Hardware Overview LEDs Getting Started Using the Configuration Menu ¾ Click LoginInternet Connection Setup Wizard BasicWizardWireless Security Setup Wizard BasicWANStatic WAN Mode Dhcp WAN ModePPPoE PptpL2TP AdvancedPage BasicLAN Enable Dhcp Server BasicDHCPDhcp IP Address Range ExampleDhcp Lease Time Always BroadcastAdd/Edit Static Dhcp Client Static Dhcp Client ListBasicWireless Enable Wireless RadioWireless Network Name Super G ModeVisibility Status Auto Channel SelectWEP WPA-Personal and WPA-EnterpriseWPA-Personal Advanced Optional Backup Radius Server Advanced AdvancedVirtual ServerEnable Add/Edit Virtual ServerName IP AddressAdvancedSpecial Applications Virtual Servers ListRtsp FTPSIP AOL MMSAdvancedGaming Special Applications Rules ListEdit/Add Game Rule TCP Ports To Open / UDP Ports To OpenGame Rules List AdvancedTraffic Shaping Traffic Shaping Setup Enable Traffic Shaping Automatic ClassificationDynamic Fragmentation Automatic Uplink SpeedAdd/Edit Traffic Shaping Rule PrioritySource IP Range Source Port RangeAdvancedRouting Add/Edit RouteRoutes List AdvancedAccess Control Add/Edit Access Control Rule Log Internet AccessPolicy Name Address TypeAccess Control Rules List AdvancedWEB FilterAdd/Edit Web Site Web SiteEnable MAC Address Filter AdvancedMAC Address FilterDoubleclick.net Save Allowed Web Site ListFilter Settings Mode Filter Wireless ClientsFilter Wired Clients Add/Edit MAC AddressEnable SPI Enable DMZAdvancedFirewall DMZ IP AddressAdvancedInbound Filter Add/Edit Inbound Filter RuleAction AdvancedAdvanced Wireless Inbound Filter Rules ListAllow All Deny All802.11d Enable Transmit PowerWDS Enable Fragmentation ThresholdAdvancedSchedules Add/Edit Schedule RuleDays All Day 24 hrsEnd Time Schedule Rules ListToolsAdmin ToolsAdmin Password User PasswordEnable Remote Management Remote Admin PortToolsTime Time Configuration Time Zone Daylight Saving EnableAutomatic Time Configuration Enable NTP Server Daylight Saving OffsetEnable Logging to Syslog Server ToolsSyslogSyslog Server IP Address Enable Enable Email Notification Email Settings From Email AddressToolsEmail To Email AddressEnable Authentication PasswordVerify Password Email Log When Full or on Schedule On Log FullReboot the Device Restore all Settings to the Factory DefaultsToolsSystem ToolsFirmwareFirmware Upgrade Firmware InformationUpload Enable Dynamic DNS ToolsDynamic DNSServer Address Host Name Password or Key Verify Password or Key Timeout Status StatusDevice infoStatusWireless Dhcp ConnectionPPPoE, PPTP, L2TP Connection BigPond ConnectionSignal StatusRoutingStatusLogs What to ViewView Levels StatusStatistics StatusActive Sessions NAT Adsl AsciiBootp CAT Dhcp DMZDNS DSLEAP GUI Http HttpsIcmp IeeeIPX ISPLAN LEDLPR/LPD MDIMdix MIBMppe MTUNIC NTPOfdm OSIPPP RadiusRIP RSA SmtpSnmp SohoSsid TCPTCP/IP TftpURL USBUTP VlanWDS WispWlan WPALimited Warranty

Related manuals

Manual 16 pages 50.98 Kb