displayed here.
Add/Edit Traffic Shaping Rule
Automatic classification will be adequate for most applications, and specific Traffic Shaping Rules will not be required. A Traffic Shaping Rule identifies a specific message flow and assigns a priority to that flow.
Enable
Each entry in Traffic Shaping Rules List can be active (enabled) or inactive (disabled)
Name
Create a name for the rule that is meaningful to you.
Priority
The priority of the message flow is entered here. 0 receives the highest priority (most urgent) and 255 receives the lowest priority (least urgent).
Protocol
The protocol used by the messages.
Source IP Range
The rule applies to a flow of messages whose
Source Port Range
The rule applies to a flow of messages whose
Destination IP Range
The rule applies to a flow of messages whose
Destination Port Range
The rule applies to a flow of messages whose
Save
Saves the new or edited Traffic Shaping Rule in the following list. When finished updating the Traffic Shaping rules, you must still click the Save Settings button at the top of the page to make the changes effective and permanent.
Traffic Shaping Rules List
The section shows the currently defined Traffic Shaping rules. A Traffic Shaping rule can be changed by clicking the Edit icon, or deleted by clicking the Delete icon. When you click the Edit icon, the item is highlighted, and the "Edit Traffic Shaping Rule" section is activated for editing.
34