Caution! Reverse Polarity
Power connections of the 12 volts DC battery to the XPower must be positive to positive and negative to negative.
A reverse polarity connection (positive to negative) will blow a fuse in the inverter and may permanently damage the unit. Damage caused by a reverse polarity connection is not covered by your warranty.
3.Take the cables equipped with battery clips on one end
(Figure 6) and place the ring terminals over the two cabling terminals on the back of the inverter. (The cabling terminals are shown in Figure 4.))
Caution!
Make sure you connect red to red and black to black, and make sure you screw the nuts on tightly.
26