Measured inverter output is too low.
Possible Cause | Suggested Remedy |
Astandard
The battery voltage is too low.
For accurate measurement, the XPower modified sine wave output requires a “true RMS” voltmeter for accurate measurements.
Recharge the battery.
Alarm is sounding.
Possible Cause | Suggested Remedy |
|
|
Low voltage shutdown or | Shorten cables or use heavier |
thermal shutdown has occurred. | cables. Recharge battery. Allow unit |
| to cool. Improve air circulation |
| around unit. Locate units in a cooler |
| environment. Reduce load if |
| continuous operation is required. |
38