Overload Shutdown If you connect an AC load that is rated too high (see Table 1 on page 30) or a load that draws excessive surge power, the XPower shuts down. The red FAULT light comes on.
Over Temperature Shutdown The XPower shuts down automatically if it exceeds its safe operating temperature. The red FAULT light comes on.
High Input Voltage Shutdown If a defective battery charging system causes the battery voltage to rise to dangerously high levels, the XPower shuts down automatically. The red FAULT light comes on.
Shutting the Inverter Off
•If you are going to disconnect the battery, turn the inverter off first.
•Turn the inverter off using the front panel On/Off switch.
Operating Normal Loads
The XPower is capable of continuously powering most
29