Using XPower Powerpack 600HD for the First Time
Using XPower Powerpack 600HD for the First Time
Important: Prior to operating your AC appliance or 12 V DC appliance, ensure that the battery of the XPower Powerpack is fully charged. If the battery has been fully discharged, recharging with the AC Charger may take up to 35 hours.
Recharging with the AC Charger
Note: The Battery Charge (%) reading on the digital display is only accurate when the XPower Powerpack has been disconnected from all appliances and all charging sources for 15 minutes.
Recharging with the AC charger is a true
To recharge with the AC Charger:
1.Disconnect any 12 V DC appliances and turn the light off.
2.Turn the AC Outlet ON/OFF switch to OFF.
3.Plug the AC Charger into a standard AC wall outlet.
4.Insert the AC Charger cable end into the charger input socket located in the storage compartment of the unit.
The green Charging Status light changes from flashing to steady when charging is complete (about 35 hours if the battery is completely discharged).
Important: The
13 |