Xantrex Technology 600HD manual Connecting to an External Battery

Page 37

Connecting to an External Battery

To disconnect the cables from an external battery and from the XPower Powerpack:

1.To disconnect the XPower Powerpack from the external battery when the external battery is discharged or no longer needed, remove the red positive (+) clip, and then remove the black negative (–) clip.

2.Remove the cables from the jump-start cable port.

3.Recharge the XPower Powerpack as soon as possible after use.

CAUTION

Do not recharge the XPower Powerpack when an external battery is connected. The AC charger may be damaged.

24	975-0213-01-01

Image 37

Contents XPower Powerpack 600HD Owner’s Guide XPower Powerpack 600HDDate and Revision Conventions Used PurposeRelated Information Important Safety Instructions Safety Safety Precautions When Working With Batteries Precautions for Using Rechargeable Appliances Viii Contents Troubleshooting MaintenanceSpecifications Introduction About the XPower Powerpack 600HDComprehensive Protection Automatic overloadJump-Start Cables Safety Feature Low Battery ProtectionMaterials List FeaturesFront Panel Features XPower Powerpack 600HD FeaturesFeature Description Front Panel DetailControl Panel Operation Required How to Condition Required ActionCharging Status Radio and Clock Features AM/FM Radio with Digital Alarm ClockRadio and Clock Operation Left Side View DC Power Socket canDetachable heavy-duty jump-start cables AccessoriesOperating Conditions and Guidelines OperationChoosing a Location Dry Cool Ventilated Safe Protected from battery gasesRecharging with the AC Charger Using XPower Powerpack 600HD for the First TimeTo recharge with the AC Charger Operating AC Appliances Using the LightUnderstanding AC Appliances Run Time on Typical AC Appliances AC-powered Products Watts a Run time hours bTrouble Appliances To operate an AC appliance Operating an AC ApplianceDC Appliance Watts a Run Time Hours b Operating 12 V DC AppliancesTo operate a 12 V DC appliance To jump-start a vehicle or boat engine Jump-Starting a Vehicle’s EngineJump-Starting a Vehicle’s Engine Connecting to an External Battery Using the RadioPower Draw Listening to the AM BandConnecting to an External Battery Connecting to an External Battery Battery Maintenance MaintenanceFunction button Recharging the XPower Powerpack 600HD BatteryRecharging with the AC Charger Recharging with the DC Charging Cable Recharging the XPower Powerpack 600HD Battery Recharging From a Solar Panel Recharging with a Generator’s Regulated 12 V DC Outlet1Typical DC Coaxial Connector Connection To wire the coaxial DC connectorReplacing the External Fuse Replacing the Incandescent LightTo replace the light bulb To replace the external fuseCommon Problems TroubleshootingBuzz in Audio Equipment Television InterferenceProblem Possible Cause Solution Troubleshooting ReferenceGreen Charging Status light is Charging Green Voltage at the AC Use AC wall outlet that supplies Page Electrical Specifications SpecificationsDC Section Internal Battery Charging Controller System AC Power SectionAccessories Physical SpecificationsRadio Page Warranty Warranty and Return InformationWarranty and Return Product DisclaimerExclusions Return Procedure Return Material Authorization PolicyOut of Warranty Service Serial Number Purchased From Purchase Date Information About Your System975-0213-01-01 REV. a

Related manuals

Manual 58 pages 37.63 Kb