Xantrex Technology 600HD manual Replacing the Incandescent Light, Replacing the External Fuse

Page 45

Replacing the Incandescent Light

Replacing the Incandescent Light

To replace the light bulb:

1.Turn the light switch off.

2.Pop out the plastic lens cover.

3.Gently grasp the bulb and twist clockwise to unscrew the bulb.

4.Insert a replacement bulb of the same type and rating into the light reflector assembly.

5.Gently grasp the bulb and twist counter-clockwise to screw the bulb in.

6.Snap in the lens cover.

Replacing the External Fuse

The replacement fuse must be rated at 250 A, 32 V DC. See page 9 for the fuse location.

To replace the external fuse:

1.Remove the fuse cover.

2.Unscrew the two bolts on the fuse.

3.Replace the fuse. Ensure that the replacement fuse is rated at 250 A, 32 V DC and is of the same type.

4.Tighten the fuse with the two bolts.

5.Replace the fuse cover.

32	975-0213-01-01

Image 45

Contents XPower Powerpack 600HD Owner’s Guide XPower Powerpack 600HDDate and Revision Conventions Used PurposeRelated Information Important Safety Instructions Safety Safety Precautions When Working With Batteries Precautions for Using Rechargeable Appliances Viii Contents Maintenance TroubleshootingSpecifications Introduction About the XPower Powerpack 600HDComprehensive Protection Automatic overloadJump-Start Cables Safety Feature Low Battery ProtectionMaterials List FeaturesFront Panel Features XPower Powerpack 600HD FeaturesFeature Description Front Panel DetailControl Panel Operation Required How to Condition Required ActionCharging Status Radio and Clock Features AM/FM Radio with Digital Alarm ClockRadio and Clock Operation Left Side View DC Power Socket canDetachable heavy-duty jump-start cables AccessoriesOperating Conditions and Guidelines OperationChoosing a Location Dry Cool Ventilated Safe Protected from battery gasesUsing XPower Powerpack 600HD for the First Time Recharging with the AC ChargerTo recharge with the AC Charger Using the Light Operating AC AppliancesUnderstanding AC Appliances Run Time on Typical AC Appliances AC-powered Products Watts a Run time hours bTrouble Appliances To operate an AC appliance Operating an AC ApplianceDC Appliance Watts a Run Time Hours b Operating 12 V DC AppliancesTo operate a 12 V DC appliance To jump-start a vehicle or boat engine Jump-Starting a Vehicle’s EngineJump-Starting a Vehicle’s Engine Connecting to an External Battery Using the RadioPower Draw Listening to the AM BandConnecting to an External Battery Connecting to an External Battery Battery Maintenance MaintenanceFunction button Recharging the XPower Powerpack 600HD BatteryRecharging with the AC Charger Recharging with the DC Charging Cable Recharging the XPower Powerpack 600HD Battery Recharging From a Solar Panel Recharging with a Generator’s Regulated 12 V DC Outlet1Typical DC Coaxial Connector Connection To wire the coaxial DC connectorReplacing the External Fuse Replacing the Incandescent LightTo replace the light bulb To replace the external fuseCommon Problems TroubleshootingBuzz in Audio Equipment Television InterferenceProblem Possible Cause Solution Troubleshooting ReferenceGreen Charging Status light is Charging Green Voltage at the AC Use AC wall outlet that supplies Page Specifications Electrical SpecificationsDC Section Internal Battery Charging Controller System AC Power SectionPhysical Specifications AccessoriesRadio Page Warranty Warranty and Return InformationWarranty and Return Disclaimer ProductExclusions Return Procedure Return Material Authorization PolicyOut of Warranty Service Serial Number Purchased From Purchase Date Information About Your System975-0213-01-01 REV. a

Related manuals

Manual 58 pages 37.63 Kb