User’s Guide
SIBTF10xx-1xx-MR & SIBTF10xx-1xx-MS
Substation-Rated Industrial Ethernet Switch
•10/100Base-TX to 100Base-FX
•Single or Redundant Wide Input Power Supply
The SIBTF10xx-1xx-Mx Ethernet industrial switches allow connecting 10Base-T Ethernet/100Base-TX fast Ethernet twisted-pair copper network devices to network devices on a 100Base-FX fast Ethernet fiber network.
140-MR
The SIBTF10xx-140-MR has four RJ-45 copper ports and one fiber port. The SIBTF10xx-140-MR model includes redundant power-supply terminal blocks that can handle 48–170VDC or 90–125VAC, 50/60Hz input power. The SIBTF10xx-140-MS model, not shown, has a single power-supply terminal block (TB).
The SIBTF10xx-130-MR has three RJ-45 copper ports and two fiber ports. The SIBTF10xx-130-MR model includes redundant power-supply terminal blocks that can handle 48–170VDC or 90–125VAC, 50/60Hz input power. The SIBTF10xx-130-MS model, not shown, has a single power-supply terminal block (TB).
130-MR
110-MR
The SIBTF10xx-110-MR has one RJ-45 copper port and one fiber port. The SIBTF10xx-110-MR model includes redundant power-supply terminal blocks that can handle 48–170VDC or 90–125VAC, 50/60Hz input power. The SIBTF10xx-110-MS model, not shown, has a single power-supply terminal block (TB).
Available Models | . .2 |
Installation | . .4 |
Operation | .15 |
Cable Specifications | .20 |
Technical Specifications | .22 |
Troubleshooting | .24 |
Contact Us | .26 |
Compliance Information | .27 |
