ATTENTION
This is a Class 1 Laser/LED product. Don’t stare into the Laser/LED Beam.
Cabling
•Using four twisted-pair, Category 5 cabling for RJ-45 port connection. The cable between the converter and the link partner (switch, hub, workstation, etc.) must be less than 100 meters (328 ft.) long.
•Fiber segment using single-mode connector type must use 9/125 um single-mode fiber cable. User can connect two devices in the distance up to 30 Kilometers.
•Fiber segment using multi-mode connector type must use 50 or 62.5/125 um multi-mode fiber cable. User can connect two devices up to 2Km distances.
Wiring the Power Inputs
Please follow below steps to insert the power wire.
1.Insert the positive and negative wires into the V+ and V- connector on the terminal block connector.
2.To tighten the wire-clamp screws for preventing the DC wires to loose.
[NOTE] The wire range of terminal block is from 12~ 24 AWG.
8
