Transition Networks SISTM10XX-162-LR installation manual Event Configuration interface

Event Configuration

The selected events that occur will send out the alert to the assigned SMTP server. Also, user can select port events for alerting.

•System event selection: 4 selections – Device cold start, Power status, SNMP Authentication Failure, and X-Ring topology changes. Mark the checkbox to select the event. When selected events occur, the system will sent out the alerting

￿Device cold start: When the device executes cold start action, the system will send out the alert to the dedicate SMTP server

￿Power status: When the device power status has changed, the system will send out the alert to the dedicate SMTP server

￿SMNP Authentication Failure: When the SNMP authentication fail, the system will send out the alert to the dedicate SMTP server

￿X-Ring topology change: When the X-Ring topology has changed, the system will send out the alert to dedicate SMTP server

•Port event selection: Select the per port events. Per port has 3 selections – Link UP, Link Down, and Link UP & Link Down. Disable means no event is selected

￿Link UP: The system will send out an alert when port connection is up only

￿Link Down: The system will send out an alert message when port connection is down only

￿Link UP & Link Down: The system will send out an alert message when port connection is up and down

•After selected, click

Apply

Event Configuration interface

28