Transition Networks SISTM10XX-162-LR installation manual Event Configuration

System Log Configuration interface

Event Configuration

User can select the system log events. When selected events occur, the system will send out the log information. Also, per port log events can be selected.

•System event selection: 4 selections – Device cold start, Power status, SNMP Authentication Failure, and X-Ring topology change. Mark the checkbox to select the event. When selected events occur, the system will produce the logs

￿Device cold start: When the device executes cold start action, the system will produce a log message

￿Power status: When the device power status has changed, the system will produce a log message

￿SNMP Authentication Failure: When the SNMP authentication fails, the system will produce a log message

￿X-Ring topology change: When the X-Ring topology has changed, the system will produce a log message.

•Port event selection: Select the per port events. Per port have 3 selections – Link UP, Link Down, and Link UP & Link Down. Disable means no event is selected.

￿Link UP: The system will produce a log message when port connection is up only

￿Link Down: The system will produce a log message when port connection is down only

￿Link UP & Link Down: The system will produce a log message when port connection is up and down

46