Transition Networks SISTF1010-150-LR(T) installation manual Warranty

Page 35

SISTF1010-150-LR(T) Industrial Unmanaged Switch

Transition Networks

Warranty, continued

Customer pays

The customer must pay the non-compliant product(s) return transportation cost to Transition

non-compliant

Networks for evaluation of said product(s) for repair or replacement. Transition Networks will

return costs

pay for shipping the repaired or replaced in-warranty product(s) back to the customer (any and

 

all customs charges, tariffs, or/and taxes are the customer’s responsibility).

 

 

Non-warranty

Before making any non-warranty repair, Transition Networks requires a $200 charge, plus

repair costs

actual shipping costs to and from the customer. If the repair is greater than $200, an estimate

 

is issued to the customer for authorization of repair. If no authorization is obtained, or the

 

product is deemed not repairable, Transition Networks will retain the $200 service charge and

 

return the product to the customer not repaired.

 

 

Repaired non-

Non-warranted products repaired by Transition Networks for a fee will carry a 180-day limited

warranty

warranty. All warranty claims are subject to the restrictions and conventions set forth by this

products

document.

 

Transition Networks reserves the right to charge for all testing and shipping incurred, if after

 

testing, a return is classified as “No Problem Found.”

 

 

This warranty is

This warranty is your only remedy. No other warranties, such as fitness for a particular

your only remedy

purpose, are expressed or implied. Transition Networks is not liable for any special, indirect,

 

incidental or consequential damages or losses, including loss of data, arising from any cause

 

or theory. Authorized resellers are not authorized to extend any different warranty on

 

Transition Networks’ behalf.

 

 

24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600

27

Image 35
Contents SISTF1010-150-LRT Installation ManualPage Table of Contents Transition Networks SISTF1010-150-LRT Trademark, copyright, and product classification information III About this product and manualOn next Transition Networks Section SISTF1010-150 Industrial Unmanaged Switch General description SISTF1010-150 Industrial Unmanaged Switch part numbers Package contents Physical description SISTF1010-150-LRT Industrial Switch Front ViewPhysical description Section Installation DIN rail mounting DIN rail mounting Wall mount Wall mountingGrounding the Industrial Switch Connecting power to the Industrial Switch Connecting power to the Industrial Switch Connecting power to the Industrial Switch Barrel Connector Interface Cable Connecting copper cables LNK/ACT Light Emitting Diodes LEDsSection Advanced Features Straight-Through and Crossover Cables Advanced FeaturesSection Cable Specifications Copper RJ-45 cable specifications Section TroubleshootingTroubleshooting problem and corrective action table Section Contact Us, Warranty Compliance Information Contact us Warranty Warranty Cuation Compliance informationSISTF1010-150-LRT Industrial Unmanaged Switch SISTF1010-150-LRT specifications, notices, and warnings Appendix a Technical SpecificationsSISTF1010-150-LRT specifications, notices, and warnings