Technical Specifications

Cable Specifications -- Continued

SBFTF1029-100	1310 nm (TX) / 1550 nm (RX) simplex
SBFTF1029-101	1550 nm (TX) / 1310 nm (RX) simplex
Fiber-optic Transmitter Power:	min: -13.0 dBm	max: -6.0 dBm
Fiber-optic Receiver Sensitivity:	min: -32.0 dBm	max: -3.0 dBm
Link Budget:	19.0 dB
SBFTF1029-102	1310 nm (TX) / 1550 nm (RX) simplex
SBFTF1029-103	1550 nm (TX) / 1310 nm (RX) simplex
Fiber-optic Transmitter Power:	min: -8.0 dBm	max: -3.0 dBm
Fiber-optic Receiver Sensitivity:	min: -33.0 dBm	max: -3.0 dBm
Link Budget:	25.0 dB
SBFTF1035-100 (long wave)	1550 nm multimode
Fiber Optic Transmitter Power:	min: 0.0 dBm	max: +5.0 dBm
Fiber Optic Receiver Sensitivity:	min: -36.0 dBm	max: -3.0 dBm
Link Budget:	36 dB
SBFTF1039-100	1300 nm multimode
Fiber Optic Transmitter Power:	min: -19.0 dBm	max: -14.0 dBm
Fiber Optic Receiver Sensitivity:	min: -30.0 dBm	max: -14.0 dBm
Link Budget:	11dB

The fiber optic transmitters on this device meet Class I Laser safety requirements per IEC-825/CDRH standards and comply with 21 CFR1040.10 and

21CFR1040.11.

Copper Cable

Category 3: (Minimum requirement for 10 Mb/s operation)

Gauge	24 to 22 AWG
Attenuation	11.5 dB/100m @ 5-10 MHz
Maximum Cable Distance	100 meters
Category 5: (Minimum requirement for 100 Mb/s operation)
Gauge	24 to 22 AWG
Attenuation	22.0 dB /100m @ 100 MHz
Maximum Cable Distance	100 meters

•Straight-through or crossover twisted-pair cable may be used.

•Shielded (STP) or unshielded (UTP) twisted-pair cable may be used.

•Pins 1&2 and 3&6 are the two active pairs in an Ethernet network .

•Use only dedicated wire pairs for the active pins:

(e.g., blue/white & white/blue, orange/white & white/orange, etc.)

•Do not use flat or silver satin wire.

For use with Transition Networks Model SBFTF10xx-10x or equivalent.

Standards	IEEE 802.3™
Data Rate	10 Mb/s, 100 Mb/s
Dimensions	3.25" x 1.0" x 4.7" (83 x 25 x 119 mm)
Weight	10 oz. (283 g) (approximate)
Power Consumption	4.95 watts
Power Supply	12 VDC, 0.8 Amp (N. America, Europe, Japan, UK)
	12 VDC, 1.25 Amp (Latin Am., Australia, N.Z., S. Africa)
	(The external power supply provided with this product is
	UL listed by the power supply’s manufacturer.)
MTBF	426,000 hours (MIL217F2 V5.0) (MIL-HDBD-217F)
	1,326,000 hours (Bellcore7 V5.0)
Packet Size:	Memory: 256K bytes (2 Mbit)
	Unicast MAC addresses: 4K
	Maximum packet size: 1536 bytes
Environment	Tmra*:	0 to 50°C (32 to 122°F )
	Storage Temp:	-20 to 85°C (-4 to 185°F)
	Humidity:	5 to 95%, non condensing
	Altitude:	0 to 10,000 feet
Warranty	Lifetime

*Manufacturer’s rated ambient temperature.

The information in this user’s guide is subject to change. For the most up-to-date information, view the user’s guide on-line at: www.transition.com.

Product is certified by the manufacturer to comply with DHHS Rule 21/CFR, Subchapter J applicable at the date of manufacture.

CAUTION: Visible and invisible laser radiation when open. Do not stare into the beam or view directly with optical instruments.

CAUTION: Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure.

•Is the power cord properly installed in the media converter and at the external power source?

•Does the external power source provide power?

•Contact Technical Support: US/Canada: 1-800-260-1312,

International: 00-1-952-941-7600.

YES

•Proceed to step 2.

24-Hour Technical Support: 1-800-260-1312-- International: 00-1-952-941-7600

techsupport@transition.com -- Click the “Transition Now” link for a live Web chat.