IBM NH2025-10 manual Get-lt-entry, Get-lt-16

Configuring, Modifying, and Monitoring the Unit

Example

SYS_console> set-lt-age run 400

Aging Period update – OK

SYS_console>

get-lt-entry

The get-lt-entrycommand displays the entry at index in the Switching Database.

get-lt-entry <index>

The index value is the entry number in decimal, between 1 and 12288.

Example

SYS_console>get-lt-entry 1

Entry ---- MAC Address ---- LOCK DPORT SELF Vid T

=================================================================

100-20-1a-00-8c-3f + -NONE- + 0000 - SYS_console>

∙Entry – Signifies the index in the Switching Database Table.

∙MAC Address – contained in an entry or given as a parameter is printed as a 6-byte hexadecimal sequence separated by the “-” sign. For example:

00-20-1A-00-01-29

∙LOCK – If on (denoted as a +), the entry is not deleted by the switch aging process (static entry). If off (denoted as a -), this is a dynamic entry that may be automatically deleted by the switch aging process if the MAC address is not active during the aging time period.

∙DPORT – The destination port to which frames with the stated address are forwarded.

∙SELF (not user configurable) – If on (denoted as a +), the entry is a system address. These addresses are the switch’s individual and group addresses, as well as other addresses added by the management system. If off (denoted as a -), the entry contains the MAC address of a station connected to the switch.

∙VID – The VLAN Identifier (tag) (appears only when features are enabled).

∙T – Tag flag (appears only when features are enabled).

get-lt-16

The get-lt-16command displays 16 learning table entries starting at index, or * to continue from the last displayed index. The format of the display is similar to the previous command format. If the end of the Learning table is reached, the * parameter starts the list over from the beginning.

get-lt-16 {<index>*}

40