Software Installation Examples
Before installing the driver programs, please refer to each directory that contains a README file, which provides detailed installation instructions, or to execute the HELP8139.EXE help file viewer in DOS. The utility will then present with a screen showing the information about how to install the network driver. Driver needed for the
adapter to work with the operating system.
5-9. Realtek 8139 LAN Driver Installation Procedure:
Please note: The LAN Driver installation has to be done after completing Win 95/98/2000 installation.
When completed with the WIN 95/98 installation, please click “MyComputer”to start your LAN driver installation (procedure listed as below):
My Computer èControl Panel èSystem èDevice Managerè
? Other Devices è?
PCI Ethernet Controller èProperties èDriver èUpdate Drive
èYes (Recommended) èNext èOther Locations èBrowse èA:\Rtsnt.100\Exe\Win95 èOK èFinish
After finishing the above procedure, the screen will show “copy the files from?”
Please type A:\Rtsnt.100\Exe\Win95=> OK and select “OK”, the system will ask you to insert Win95 driver diskette to update new driver.
After finishing the above steps, please shut down your system and
Appendix A: FLASH Memory Utility
Using this utility to update the system BIOS from a disk file to the on board Flash memory. Be aware the improper change of the system BIOS will cause the system to malfunction.
Using utility as follows:
1.nsert the FLASH memory BIOS utility distribution floppy diskette in drive A:
2.At the DOS prompt, type A:\> F82725 xxxx.ROM <Enter>
- 42 -