AGP Mode | 4x |
AGP Read Synchronization | Enabled |
AGP Fast Write | Disabled |
AGP Aperture Size | 128MB |
AGP Master 1 W/S Write | Disabled |
AGP Master 1 W/S Read | Disabled |
PCI Delay Transaction | Enabled |
USB Controller | All USB Port |
USB Device Legacy Support | All Device |
|
|
Configure SDRAM Timing by SPD
SPD (Serial Presences Detect) is a device in memory module for storing the module information such as DRAM timing and chip parameters. If this option is enabled, BIOS will access SPD automatically to configure module timing. If disabled, DRAM timing can be configured manually.
SDRAM Frequency
- Allows you to set the SDRAM frequency with user set by SPD Disable. <Choices: 66MHz / 100MHz / 133MHz>
Caution: Improper setting will cause unpredicted result
SDRAM CAS# Latency
With SDRAM Timing by SPD disabled, you can select
- The SDRAM CAS# (ColumnAddress Strode) latency manually. Choices: 2 Clocks; 3 Clocks
SDRAM Bank Interleave
This function is to enable / disable SDRAM Bank Interleave function. Choices: “Disabled”/ “Enabled”
Memory Hole
To enabled / disabled (default) the support of Memory Hole which is reserved for ISA card.
AGP Mole
This function allows seeing theAGP Mode onboard. The default setting is “Auto”. This item support 1x/2x and 4x AGP Mode
AGP Read Synchronization
To enabled / disabled the AGP Read Synchronization function.
AGP Fast Write
This function allows enabling / disabling the AGP Fast Write function
AGP Aperture Size
- 26 -