HP 7450 Application Software Suite Microsoft Exchange Media LTU manual RMExch portconfig

RMExch portconfig

SYNTAX

RMExch portconfig -h <WindowsServer> [-p <portnumber>]

DESCRIPTION

The RMExch portconfig command will display or update the current port configuration for the Recovery Manager for Exchange service and RMExch CLI for the specified Windows server. When only the -hargument is supplied, this command will list the current port number used by Recovery Manager for Exchange for the Windows server. When -p is supplied, the port will be updated to the argument followed by -p. The default port used by Recovery Manager for Exchange is 9933. This should be run against all of the production servers and backup servers. If you update the port setting on a Windows server, you will need to restart the Recovery Manager for Exchange Agent Service before connecting through that port.

PARAMETERS

The following options are supported:

•-h <WindowsServer> - The name of the windows server to display/update the port configuration. If the host is in a different domain, specify the FQDN.

•-p <portnumber> - Optional. If specified, the command will update the port used. If unspecified, the command will show the current configuration. Valid values are 1024 to 65535.

Examples

The following command will display the current port configuration for server Alpha.

RMExch portconfig -h Alpha

The following command will update the port configuration for server Alpha to 9950.

RMExch portconfig -h Alpha -p 9950

68 Using the Recovery Manager CLI