HP 10400 Application Software Suite for Microsoft Exchange Media LTU RMExch unmount, Examples

RMExch unmount

SYNTAX

RMExch unmount -s <ExchangeServer> -g <StorageGroup> -t <Timestamp> [-domain <DomainName>]

DESCRIPTION

The RMExch unmount command unmounts a currently mounted virtual copy. When using the RMExch mount command to mount a virtual copy, the program will check to see if the virtual copy is mounted to a host machine. The virtual copy must have a status of “Mounted” or “Exposed” before it can be unmounted.

PARAMETERS

The following options are supported:

•-s <ExchangeServer> - The name of the Exchange server for which the storage group belongs.

•-g <StorageGroup> - The name of the storage group for which the virtual copy timestamp belongs.

•-t <Timestamp> - The timestamp of the virtual copy to unmount.

•-domain <DomainName> - Optional. Specifies the domain to which the Exchange server or storage group belongs.

If this option is not specified, Recovery Manager uses the local domain.

NOTE: Use quotes ("") where spaces are included.

NOTE: The -hoption was deprecated in release 3.1.1.

Examples

The following command will unmount the virtual copy 020405162103.

RMExch unmount -s bottlenosed -g sg2 -t 020405162103

78 Using the Recovery Manager CLI