Figure 3 Single Host Backup Configuration
CCR Backup Configuration
CCR configurations can be implemented at a single site or span multiple sites. When implemented at a single site, a single backup server is utilized as shown in Figure 4 (page 15) and Figure 5 (page 16). For implementations that span multiple sites, two backup servers are required as shown in Figure 6 (page 16). The command RMExch peer is used to specify the name of the peer backup server for multiple sites. This command must be run in CCR configurations using two backup servers and is not required for CCR configurations using only one backup server. See “Configuring Recovery Manager” (page 22).
