HP 7450 Application Software Suite Microsoft Exchange Media LTU manual RMExch peer

RMExch peer

SYNTAX

RMExch peer [[<display>][-clear][-bs <peer_server>]]

DESCRIPTION

The RMExch peer command configures the peer backup servers for two HP 3PAR Storage System CCR configurations. The backup server executes all commands and sends certain commands to the peer backup server to run (such as create and backup) for the passive node option. Once the configuration is set, you will not need to run this command again unless you want to change the peer relationship between the backup servers.

PARAMETERS

The following options are supported:

•-bs <peer_server> - The server's name you would like to designate as your peer backup server.

•-display- Used if the -bsparameter is not used. Displays the current configuration of your peer backup servers.

•-clear- To remove the peer relationship between backup servers. Once the peer relationship is removed, both backup servers are no long able to manage CCR nodes.

NOTE: The RMExch peer command is intended only for CCR configuration. The -bsoption only needs to be run once to set up the peer relationship and to manage the CCR configuration.

Examples

The following command will configure the peer backup server .

RMExch peer -bs server1

Recovery Manager Commands 65