Philips TSU7500-SBC RU990 To add an action to the action list, To add a delay to the action list

Page 41

Using the Power Features

User Guide

39

Note You can assign a macro to most buttons of your ProntoPro NG. Only the hard buttons on the left side of ProntoPro NG (Backlight, Page Up and Page Down) cannot be programmed.

To add an action to the action list

1Tap in the ‘Macro’ screen. The last visited page appears again.

2Navigate to the Device and the Page that contains the button you want to add to the macro.

3Tap the button with the action(s) you want to add to the macro. The ‘Macro’ screen appears.

The name of the selected button is added at the bottom of the Action List. The macro will execute all the actions that are assigned to this button.

4You can select other buttons to add to the macro.

To add a delay to the action list

You can add a delay to the action list e.g. to insert a short pause between turning on a device and sending commands to it, allowing the device to warm up.

1Tap in the ‘Macro’ screen.

The ‘+’ button and ‘-’ button appear on the two middle firm keys below the touch screen.

2To increase the delay, tap (and hold) the firm key labeled ‘+’. -or-

To decrease the delay, tap (and hold) the firm key labeled ‘-’.

Note You can still change the delay later on.

To add a beep to the action list

To determine when the macro execution is finished, it is useful to add a beep as final command in the action list.

1Select the action in the action list, where you want to add a beep. The action is selected.

2Tap in the ‘Macro’ screen.

A default beep is added to the action list, after the selected action.

To test the macro

You do not have to exit the Macro Tool to try out the macro you created or edited. From within the Macro Tool you can test the macro. ProntoPro NG executes all actions as you defined them in the action list.

EN

Page 40 Page 42
Image 41
Page 40 Page 42
Contents TSU7500-SBC RU990 Page ProntoPro Next Generation User Guide ProntoPro Next GenerationTable of Contents Table of Contents ProntoPro NG Home Theater Control Panel Taking a First LookDevice Taking a First LookUSB port Touch Screen Docking Station ProntoPro NG has a USB port to make downloading much easier What’s New for ProntoPro Next Generation?Before You Start Installing the Battery PackCharging the ProntoPro NG Cool down the battery pack Turning on ProntoPro NG Tilt ProntoPro NG more than 50 degrees default settingGetting Started Changing the Time Setting Time and DateChanging the Time Format To change the day Changing the DateTo change the month Tools MenuYou can change the language used on your ProntoPro NG Setting the LanguageTo change the year Device Overview Operating ProntoPro NGOverview Using the Tools Selecting the Brand and Code Set for your Device Customizing ProntoPro NGDefining the Brand for a Device Selecting the brand Installing the brandSelecting the code set Tap ‘Code sets’ screen appearsTap and point ProntoPro NG at the device Searching the code setSearching the Brand and Code Set for your device Searching the brand Learning CommandsTap the button you want to learn Learning a ButtonLearning a Device Action Tap the Device for which you want to learn a Device Action Labeling ElementsYou can choose from four different character sets Labeling a ButtonLabeling a Labeling a DeviceTap in the ‘Label Tool’ screen. The Page Overview appears Follow the instructions 6 to 8 of ‘Labeling a Button’ onAdding a New Device Adding DevicesCopying an Existing Device Deleting a Button Deleting ElementsDeleting a Device Delete Tool allows you to delete a button or a deviceMoving Devices Adjusting the Settings Select First Settings Page appears Setting the Brightness of the BacklightSetting the Timeout of the LCD Screen Setting the Navigation for ProntoPro NG Setting the Volume LevelSetting the Volume Level of the Hard Buttons Setting the Volume Level of the Touch ScreenCalibrating the Touch Screen Setting the Animation ModeAdjusting the Firm Keys Settings Adjusting the Screen Activation SettingsAdjusting the Pickup Sensor Settings Adjusting the Cursor Keys SettingsCreating a Macro Using the Power FeaturesCreating and Editing Macros To add an action to the action list To add a delay to the action listTo add a beep to the action list To test the macroTo finish the macro Editing a MacroMoving an action in the action list Deleting an action from the action listActivating Timers Creating and Editing TimersDeleting a Timer Creating and Editing TimersAdding a Timer Labeling a Timer Editing a Timer Setting the Start Time or Stop Time Setting the Start DateDefining the Start Action or Stop Action Defining the Repeat SettingsRepeat toggle NG’s touch screen Operating ProntoPro NG with the CursorIs provided below the button To set the cursor navigation An RF Extender not included is therefore required Operating ProntoPro NG with RFSelecting RF to Operate your Devices Selecting IR to Operate your Devices Plug one end of the cable in the USB port on your computer With ProntoProEdit NG you canProntoProEdit NG How do I calibrate the touch screen? Why don’t my buttons work properly?How do I reset ProntoPro NG? Reset button General Problems TroubleshootingDevices do not respond to commands from ProntoPro NG ProntoPro NG shuts off automaticallyButtons are not sending the correct commands Customizing ProblemsProntoPro NG will not learn commands Configuration file is corruptedProntoPro NG error messages Memory Storage ProblemsTimers do not work Connection to the PCMaintaining ProntoPro NG Cleaning ProntoPro NGImportant Notices Upgrading ProntoPro NGList of Symbols List of Symbols List of Symbols Included SpecificationsAction GlossaryLCD USB Index LCD screen timeout, 33 Learn Tool, 23 learning Volume mute, 5 volume down, 5 volume level, 34 volume up

TSU7500-SBC RU990 specifications

The Philips TSU7500-SBC RU990 is a sophisticated universal remote control that has garnered attention for its versatility and user-friendly design. This state-of-the-art remote is engineered to manage multiple devices, making it an indispensable accessory for any home theater setup.

One of the standout features of the TSU7500 is its capability to control a vast array of devices, including televisions, DVD players, satellite receivers, and audio systems. The remote supports infrared (IR) communication and is equipped with multiple programmable settings, allowing users to customize their experience according to their individual preferences.

The TSU7500 boasts a vibrant color touchscreen display, which provides an intuitive interface for navigation and control. This high-resolution screen enhances usability, allowing users to easily access different functions without the clutter of numerous physical buttons. The user interface can be personalized with custom icons and graphics, giving users the ability to tailor their remote to reflect their style.

Another impressive characteristic of the TSU7500 is its advanced macro functionality. This feature enables users to create personalized sequences of commands that can be executed with a single press of a button. For example, a user can program a macro to turn on the television, adjust the receiver volume, and switch the input to the DVD player all at once, streamlining the home entertainment experience.

The remote is also equipped with a robust database of device codes, ensuring compatibility with a wide range of brands and products. Furthermore, Philips provides regular firmware updates, enhancing the remote's functionality and ensuring long-term performance.

Connectivity options include USB and Ethernet ports, which facilitate easy setup and integration with a home network. The TSU7500 can also store multiple configurations, enabling it to be used in different rooms or environments without the need for reprogramming.

Overall, the Philips TSU7500-SBC RU990 exemplifies a blend of advanced technology, user-centered design, and extensive compatibility, making it a quintessential tool for anyone looking to simplify their multimedia experience. With its cutting-edge features and customizable options, the TSU7500 is a testament to Philips' commitment to innovation in home automation.
Top Page Image Contents