Philips TSU7500-SBC RU990 Maintaining ProntoPro NG, Important Notices, Cleaning ProntoPro NG

Page 62

Maintaining ProntoPro NG

Important Notices

Take care not to scratch the touch screen

Use your finger to tap the touch screen or use plastic-tipped pens intended for use with touch screen.

Never use an actual pen, pencil or other sharp object on the touch screen.

Protect ProntoPro NG from temperature extremes

Keep ProntoPro NG away from heaters and other heat sources.

ProntoPro NG is not waterproof

ProntoPro NG should not be exposed to rain or moisture.

Do not store or use ProntoPro NG in any location that is extremely damp or wet.

When you have spilled water on ProntoPro NG, you have to take out the battery pack and let ProntoPro NG dry for 48 hours before you insert the battery pack again.

The touch screen of ProntoPro NG contains a glass element

Do not drop ProntoPro NG or subject it to any strong impact.

Cleaning ProntoPro NG

■Use a soft, damp cloth to clean ProntoPro NG.

■If the touch screen of ProntoPro NG is spoiled, clean it with a soft cloth moistened with a diluted window-cleaning solution.

■Do not use a corrosive detergent or an abrasive sponge.

■Avoid the use of abundant water.

Upgrading ProntoPro NG

You can find the latest upgrades of your ProntoPro NG software (when available) on http://www.pronto.philips.com. Navigate to the Downloads section. If you are already registered you can enter your username and password to log in. Otherwise you can register and become a ProntoZone member for free.

User Guide

60

Page 61 Page 63
Image 62
Page 61 Page 63
Contents TSU7500-SBC RU990 Page ProntoPro Next Generation ProntoPro Next Generation User GuideTable of Contents Table of Contents Taking a First Look ProntoPro NG Home Theater Control PanelTaking a First Look DeviceUSB port Touch Screen Docking Station What’s New for ProntoPro Next Generation? ProntoPro NG has a USB port to make downloading much easierInstalling the Battery Pack Before You StartCharging the ProntoPro NG Cool down the battery pack Turning on ProntoPro NG Tilt ProntoPro NG more than 50 degrees default settingGetting Started Changing the Time Setting Time and DateChanging the Time Format To change the month Changing the DateTo change the day Tools MenuYou can change the language used on your ProntoPro NG Setting the LanguageTo change the year Operating ProntoPro NG Device OverviewOverview Using the Tools Selecting the Brand and Code Set for your Device Customizing ProntoPro NGDefining the Brand for a Device Selecting the code set Installing the brandSelecting the brand Tap ‘Code sets’ screen appearsTap and point ProntoPro NG at the device Searching the code setSearching the Brand and Code Set for your device Learning Commands Searching the brandTap the button you want to learn Learning a ButtonLearning a Device Action Labeling Elements Tap the Device for which you want to learn a Device ActionLabeling a Button You can choose from four different character setsTap in the ‘Label Tool’ screen. The Page Overview appears Labeling a DeviceLabeling a Follow the instructions 6 to 8 of ‘Labeling a Button’ onAdding Devices Adding a New DeviceCopying an Existing Device Deleting a Device Deleting ElementsDeleting a Button Delete Tool allows you to delete a button or a deviceMoving Devices Adjusting the Settings Select First Settings Page appears Setting the Brightness of the BacklightSetting the Timeout of the LCD Screen Setting the Volume Level of the Hard Buttons Setting the Volume LevelSetting the Navigation for ProntoPro NG Setting the Volume Level of the Touch ScreenSetting the Animation Mode Calibrating the Touch ScreenAdjusting the Screen Activation Settings Adjusting the Firm Keys SettingsAdjusting the Cursor Keys Settings Adjusting the Pickup Sensor SettingsCreating a Macro Using the Power FeaturesCreating and Editing Macros To add a beep to the action list To add a delay to the action listTo add an action to the action list To test the macroMoving an action in the action list Editing a MacroTo finish the macro Deleting an action from the action listCreating and Editing Timers Activating TimersDeleting a Timer Creating and Editing TimersAdding a Timer Labeling a Timer Editing a Timer Setting the Start Date Setting the Start Time or Stop TimeDefining the Repeat Settings Defining the Start Action or Stop ActionRepeat toggle NG’s touch screen Operating ProntoPro NG with the CursorIs provided below the button To set the cursor navigation Operating ProntoPro NG with RF An RF Extender not included is therefore requiredSelecting RF to Operate your Devices Selecting IR to Operate your Devices With ProntoProEdit NG you can Plug one end of the cable in the USB port on your computerProntoProEdit NG How do I calibrate the touch screen? Why don’t my buttons work properly?How do I reset ProntoPro NG? Reset button Devices do not respond to commands from ProntoPro NG TroubleshootingGeneral Problems ProntoPro NG shuts off automaticallyProntoPro NG will not learn commands Customizing ProblemsButtons are not sending the correct commands Configuration file is corruptedTimers do not work Memory Storage ProblemsProntoPro NG error messages Connection to the PCImportant Notices Cleaning ProntoPro NGMaintaining ProntoPro NG Upgrading ProntoPro NGList of Symbols List of Symbols List of Symbols Specifications IncludedGlossary ActionLCD USB Index LCD screen timeout, 33 Learn Tool, 23 learning Volume mute, 5 volume down, 5 volume level, 34 volume up

TSU7500-SBC RU990 specifications

The Philips TSU7500-SBC RU990 is a sophisticated universal remote control that has garnered attention for its versatility and user-friendly design. This state-of-the-art remote is engineered to manage multiple devices, making it an indispensable accessory for any home theater setup.

One of the standout features of the TSU7500 is its capability to control a vast array of devices, including televisions, DVD players, satellite receivers, and audio systems. The remote supports infrared (IR) communication and is equipped with multiple programmable settings, allowing users to customize their experience according to their individual preferences.

The TSU7500 boasts a vibrant color touchscreen display, which provides an intuitive interface for navigation and control. This high-resolution screen enhances usability, allowing users to easily access different functions without the clutter of numerous physical buttons. The user interface can be personalized with custom icons and graphics, giving users the ability to tailor their remote to reflect their style.

Another impressive characteristic of the TSU7500 is its advanced macro functionality. This feature enables users to create personalized sequences of commands that can be executed with a single press of a button. For example, a user can program a macro to turn on the television, adjust the receiver volume, and switch the input to the DVD player all at once, streamlining the home entertainment experience.

The remote is also equipped with a robust database of device codes, ensuring compatibility with a wide range of brands and products. Furthermore, Philips provides regular firmware updates, enhancing the remote's functionality and ensuring long-term performance.

Connectivity options include USB and Ethernet ports, which facilitate easy setup and integration with a home network. The TSU7500 can also store multiple configurations, enabling it to be used in different rooms or environments without the need for reprogramming.

Overall, the Philips TSU7500-SBC RU990 exemplifies a blend of advanced technology, user-centered design, and extensive compatibility, making it a quintessential tool for anyone looking to simplify their multimedia experience. With its cutting-edge features and customizable options, the TSU7500 is a testament to Philips' commitment to innovation in home automation.
Top Page Image Contents