Philips TSU7500-SBC RU990 manual Memory Storage Problems, ProntoPro NG error messages

Page 61

Troubleshooting

Timers do not work

■Check if the timer has been activated. (p. 41)

■Make sure a Start Action for the timer has been defined properly. (p. 46)

■Check whether the date and time of your ProntoPro NG are set properly. (p. 14)

Memory Storage Problems

Memory storage problems can be the cause of ProntoPro NG not saving a macro. Storage problems can be caused by a full memory or by a low battery pack.

■Consult the third Settings Page to see how much memory is available. (p. 32)

■Consult the first Settings Page or the battery icon at the top of your screen to check the battery status. Recharge if necessary. (p. 11)

ProntoPro NG error messages

If one of the following error messages occurs, please contact your dealer or the Philips customer service:

■Invalid CF version or corrupt flash;

■Incorrect software version.

When your ProntoPro NG does not respond and the screen stays blank:

1Download the configuration file again.

2When downloading the configuration file again does not work, download the firmware from http://www.pronto.philips.com.

Connection to the PC

■Make sure the ProntoPro NG battery pack is sufficiently charged while using ProntoProEdit NG to download or upload.

■Do not pull out the USB cable while uploading or downloading a configuration file.

User Guide

59

EN

Page 60 Page 62
Image 61
Page 60 Page 62
Contents TSU7500-SBC RU990 Page ProntoPro Next Generation User Guide ProntoPro Next GenerationTable of Contents Table of Contents ProntoPro NG Home Theater Control Panel Taking a First LookDevice Taking a First LookUSB port Touch Screen Docking Station ProntoPro NG has a USB port to make downloading much easier What’s New for ProntoPro Next Generation?Before You Start Installing the Battery PackCharging the ProntoPro NG Cool down the battery pack Getting Started Tilt ProntoPro NG more than 50 degrees default settingTurning on ProntoPro NG Changing the Time Format Setting Time and DateChanging the Time To change the day Changing the DateTo change the month Tools MenuTo change the year Setting the LanguageYou can change the language used on your ProntoPro NG Device Overview Operating ProntoPro NGOverview Using the Tools Defining the Brand for a Device Customizing ProntoPro NGSelecting the Brand and Code Set for your Device Selecting the brand Installing the brandSelecting the code set Tap ‘Code sets’ screen appearsSearching the Brand and Code Set for your device Searching the code setTap and point ProntoPro NG at the device Searching the brand Learning CommandsLearning a Device Action Learning a ButtonTap the button you want to learn Tap the Device for which you want to learn a Device Action Labeling ElementsYou can choose from four different character sets Labeling a ButtonLabeling a Labeling a DeviceTap in the ‘Label Tool’ screen. The Page Overview appears Follow the instructions 6 to 8 of ‘Labeling a Button’ onAdding a New Device Adding DevicesCopying an Existing Device Deleting a Button Deleting ElementsDeleting a Device Delete Tool allows you to delete a button or a deviceMoving Devices Adjusting the Settings Setting the Timeout of the LCD Screen Setting the Brightness of the BacklightSelect First Settings Page appears Setting the Navigation for ProntoPro NG Setting the Volume LevelSetting the Volume Level of the Hard Buttons Setting the Volume Level of the Touch ScreenCalibrating the Touch Screen Setting the Animation ModeAdjusting the Firm Keys Settings Adjusting the Screen Activation SettingsAdjusting the Pickup Sensor Settings Adjusting the Cursor Keys SettingsCreating and Editing Macros Using the Power FeaturesCreating a Macro To add an action to the action list To add a delay to the action listTo add a beep to the action list To test the macroTo finish the macro Editing a MacroMoving an action in the action list Deleting an action from the action listActivating Timers Creating and Editing TimersAdding a Timer Creating and Editing TimersDeleting a Timer Labeling a Timer Editing a Timer Setting the Start Time or Stop Time Setting the Start DateDefining the Start Action or Stop Action Defining the Repeat SettingsRepeat toggle Is provided below the button Operating ProntoPro NG with the CursorNG’s touch screen To set the cursor navigation An RF Extender not included is therefore required Operating ProntoPro NG with RFSelecting RF to Operate your Devices Selecting IR to Operate your Devices Plug one end of the cable in the USB port on your computer With ProntoProEdit NG you canProntoProEdit NG How do I reset ProntoPro NG? Why don’t my buttons work properly?How do I calibrate the touch screen? Reset button General Problems TroubleshootingDevices do not respond to commands from ProntoPro NG ProntoPro NG shuts off automaticallyButtons are not sending the correct commands Customizing ProblemsProntoPro NG will not learn commands Configuration file is corruptedProntoPro NG error messages Memory Storage ProblemsTimers do not work Connection to the PCMaintaining ProntoPro NG Cleaning ProntoPro NGImportant Notices Upgrading ProntoPro NGList of Symbols List of Symbols List of Symbols Included SpecificationsAction GlossaryLCD USB Index LCD screen timeout, 33 Learn Tool, 23 learning Volume mute, 5 volume down, 5 volume level, 34 volume up

TSU7500-SBC RU990 specifications

The Philips TSU7500-SBC RU990 is a sophisticated universal remote control that has garnered attention for its versatility and user-friendly design. This state-of-the-art remote is engineered to manage multiple devices, making it an indispensable accessory for any home theater setup.

One of the standout features of the TSU7500 is its capability to control a vast array of devices, including televisions, DVD players, satellite receivers, and audio systems. The remote supports infrared (IR) communication and is equipped with multiple programmable settings, allowing users to customize their experience according to their individual preferences.

The TSU7500 boasts a vibrant color touchscreen display, which provides an intuitive interface for navigation and control. This high-resolution screen enhances usability, allowing users to easily access different functions without the clutter of numerous physical buttons. The user interface can be personalized with custom icons and graphics, giving users the ability to tailor their remote to reflect their style.

Another impressive characteristic of the TSU7500 is its advanced macro functionality. This feature enables users to create personalized sequences of commands that can be executed with a single press of a button. For example, a user can program a macro to turn on the television, adjust the receiver volume, and switch the input to the DVD player all at once, streamlining the home entertainment experience.

The remote is also equipped with a robust database of device codes, ensuring compatibility with a wide range of brands and products. Furthermore, Philips provides regular firmware updates, enhancing the remote's functionality and ensuring long-term performance.

Connectivity options include USB and Ethernet ports, which facilitate easy setup and integration with a home network. The TSU7500 can also store multiple configurations, enabling it to be used in different rooms or environments without the need for reprogramming.

Overall, the Philips TSU7500-SBC RU990 exemplifies a blend of advanced technology, user-centered design, and extensive compatibility, making it a quintessential tool for anyone looking to simplify their multimedia experience. With its cutting-edge features and customizable options, the TSU7500 is a testament to Philips' commitment to innovation in home automation.
Top Page Image Contents