Fujitsu P2000 manual Setting File and Printer Sharing for Microsoft Networks

4.Check [Full computer name] and [Workgroup]. Ask your network administrator and check the setting.

Item	Description
Computer	A name to identify the computer on
Name	the network. You can specify any
	name to each computer. Use up to 15
	single-byte characters. For easier
	identification, use the model name or
	user name.
Workgroup	A name of the network group. Use up
	to 15 single-byte characters.
	AdHoc Network: Specify the same
	name to all computers within the
	same network.
	Infrastructure Network:
	Specify workgroup name to connect
	to.

Table 12: Setting computer name and workgroup

To change the setting, click [Change], and follow the instructions on the screen. [System Properties] appears again.

5.Click [OK]. When a message appears prompting you to restart the computer, click [Yes].

Sharing

In this section, you set sharing of the drive, folder, and printer.

You need to set this only when you are sharing files or a printer with other computers on the network.

When you share a drive, folder, or printer, you can use these from any computer on the network.

Setting [File and Printer Sharing for Microsoft Networks]

1.Click [Start] -> [Control Panel]. Make sure the Classic View is selected.

2.Double-click the [Network Connection] icon.

3.Right click the [Wireless Network Connection], and then click [Properties] from the menu that appears. [Wireless Network Connection Properties] appears.

4.If [File and Printer Sharing for Microsoft Networks] is displayed in the list:

Make sure that it is checked. If it is not checked, check it, and click [OK]. You do not have to perform the following steps. Go to the next section, “Sharing Files.”

If [File and Printer Sharing for Microsoft Networks] is not found in the list, click [Install], and perform

U s i n g t h e W I r e l e s s L A N

Step 5 and the subsequent steps. When you click [Install], [Select Network Component Type] appears.

5.Perform the following steps.

■Click [Service].

■Click [Add]. [Select Network Service] appears.

6.Perform the following steps.

■Click [File and Printer Sharing for Microsoft Networks].

■Click [OK]. You will go back to [Wireless Network Connection 2 Properties], and [File and Printer Sharing for Microsoft Networks] is added to the list.

7.Click [Close].

Sharing Files

The following example shows how to set sharing the “Work” folder on the c: drive.

1.Click [Start] -> [My Computer].

2.Double-click the [Local Disk (c:)] icon.

3.Right click the “Work” folder, and then click [Sharing and Security] from the menu that appears. [Work Properties] appears.

4.Click [If you understand the security risks but want to share files without running the wizard, click here].

P O I N T

If you have already clicked [If you understand the security risks but want to share files without running the wizard, click here], this window does not appear.

In the [Work Properties] window, the description under [Network Sharing and security] changes.

5.Check [Share this folder on the network].

Uncheck [Allow network users to change my files], if the shared folder is for read only.

6.Click [OK]. The folder is set shared, and the “Work” folder icon changes.

Printer Sharing

1.Press [Start]->[Control Panel] (or [Settings], if viewing in Classic mode)-> [Printers and Faxes]. The Printers and Faxes display will appear and the connected printers will be displayed.

2.Right-click the printer to be shared, and click [Sharing] from the menu that appears. The proper- ties of the printer to be shared will be displayed. Set printer sharing.

On the display, the printer sharing setting is recom- mended by the Network Setup Wizard, but for the wire- less LAN network, security is maintained by network name (SSID) or network key. The following steps allow

55