T r o u b l e s h o o t i n g
Restoring Your Pre-installed Software
The Drivers and Applications Restore (DAR) disc | 6. After the components are installed, click [OK], then |
contains sets of device drivers and Fujitsu utilities (in | click [Yes] when asked if you want to reboot the |
specific directories) that are unique to your computer | system. |
configuration for use as documented below. |
|
If you have access to the internet, visit the Fujitsu Support web site at: http:// www.computers.us.fujitsu.com/support to check for the most current information, drivers and hints on how to perform recovery and system updates.
RESTORING THE FACTORY IMAGE
The Restore Disc only restores the primary hard disk drive. If you have an optional second hard disk drive installed, it will not be restored using these utilities.
Re-Installing Individual Drivers and Applications
The Drivers and Applications disc can be used to selectively
There may be certain free
To
1.Boot up the system and insert the DAR disc after Windows has started. A Fujitsu Installer screen is displayed after the disc is inserted.
2.After reading the License Agreement, click [I agree].
3.A window will appear containing a list of applica- tions, drivers, and utilities that you can install from the Drivers and Applications disc.
The components listed are
4.In the list, check off all the components you want to install. If you want to install all components, click [Select All]. Clicking [Select All] will select all of the
5.Once you have selected the components you wish to install, click [Install Selected Subsystems]; the components will be installed.
The Restore Disc that came with your system contains two utilities:
■The Recovery utility allows you to restore the original contents of the C: drive.
■The Hard Disk Data Delete utility on this disc is used to delete all data on your hard disk and prevent it from being reused. Do not use the Hard Disk Data Delete utility unless you are absolutely certain that you want to erase your entire hard disk, including all partitions.
•The use of this disc requires that you have a device capable of reading DVDs attached to your system. If you do not have a
•This disc can only be used with the system with which it was purchased.
BOOT Priority Change
Before restoring an image, you must first verify that your system is set up to boot from the DVD drive. To verify/change the
1.Start your system and press the [F2] key when the Fujitsu logo appears. You will enter the BIOS Setup Utility.
2.Using the arrow keys, go to the Boot menu.
3.Arrow down to the Boot Device Priority submenu. Press [Enter].
4.If “Optical Media Drive” or
61