Fujitsu C2330 manual Fir

A d v a n c e d M e n u

Table 5: Fields, Options and Defaults for the Port Configuration Submenu of the Advanced Menu

Menu Field	Options	Default	Description
Serial Port:	• Disabled	[Enabled]	When [Enabled] is selected, the port is on. When [Dis-
	• Enabled		abled] is selected, the serial port is turned off. When [Auto]
	• Auto		is selected, the Plug & Play feature configures the port.
			Note that for systems running Windows XP, this legacy
			port is not supported without additional device-specific
			drivers.
I/O Address:	• 3F8 - 3FF	[3F8 - 3FF]	Select the I/O address for the serial port.
	• 2F8 - 2FF		(Note that if there is a conflict between the port interrupts
	• 3E8 - 3EF		or addresses, asterisks will appear adjacent to the affected
	• 2E8 - 2EF		port names to alert you to the fact. In that case, make a
			different selection.)
Interrupt:	• IRQ 3	[IRQ 4]	Allows user to set the infrared port base I/O address when
	• IRQ 4		the serial port is Enabled.
	• IRQ 10		(Note that if there is a conflict between the port interrupts
	• IRQ 11		or addresses, asterisks will appear adjacent to the affected
			port names to alert you to the fact. In that case, make a
			different selection.)
Infrared Port:	• Disabled	[Enabled]	When Disabled, the infrared port is off; when Enabled, the
	• Enabled		infrared port is on. When Auto is selected, the Plug & Play
	• Auto		operating system configures the port.
Mode:	• IrDA	[FIR]	Select the mode for the infrared port: Infrared or Fast Infra-
	• FIR		red.
I/O Address:	• 3F8 - 3FF	[2E8 - 2EF]	Allows user to set the infrared port base I/O address when
	• 2F8 - 2FF		the infrared port is Enabled.
	• 3E8 - 3EF
	• 2E8 - 2EF		(Note that if there is a conflict between the port interrupts
			or addresses, asterisks will appear adjacent to the affected
			port names to alert you to the fact. In that case, make a
			different selection.)
Interrupt:	• IRQ 3	[IRQ 3]	Allows user to set the infrared port interrupt when the
	• IRQ 4		infrared port is Enabled.
	• IRQ 10
	• IRQ 11		(Note that if there is a conflict between the port interrupts
			or addresses, asterisks will appear adjacent to the affected
			port names to alert you to the fact. In that case, make a
			different selection.)

13